BPCB1

Replacement Cable for BPHS1

MSRP* US$52.00

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Reviews
  • Q & A

  • Overview

    Replacement cable for BPHS1 Broadcast Headset. 3.3 m (10.8') long cable terminating in two output connectors, one each for the microphone and headphone: the microphone output is a 3-pin XLRM-type connector; the headphone output is a 3-conductor " connector.

  • Reviews

  • Q & A

    Do you have questions about this product?

    Get answers from real customers and in-house experts with AnswerBox.

    4 Questions | 4 Answers
    Displaying questions 1-4
    • Q:

      Hello
      I own four of these BPHS1 headsets. In the near future, I need to use them with a 6 pin XLR Clearcom situation. It needs to be able to plug into a Clearcom AB-100 Broadcast Announcer console unit. Do you make a cable that would connect to the BPHS1 and end in a 6 pin male XLR? The 6pin XLR config would need to be:

      Pin 1 - mic lo
      Pin 2 - mic high
      pin 3 - earpiece common
      pin 4 - earpiece left
      pin 5 - earpiece right
      pin 6 - mic shield

      I look forward to your quick reply

      thanks
      T Clark
      Asked on 2/24/2016 by T Clark from Newfoundland Canada

      1 answer

      • Staff Reviewer

        A:

        There is no 6 pin XLR for the BPHS1 headsets.

        Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for assistance with this.

        Answered on 3/1/2016 by ATUS_Specialist3
    • Q:

      Is there a cable that connects the BPHS1 directly to the iphone (TRRS) audio jack?
      Asked on 4/27/2015 by JeffY

      1 answer

      • A:

        You will need an adapter cable from a third party to do this. I suggest the KM-IPHONE-X43 available from kv connection.com .
        Note that to MONITOR the microphone signal as it is being recorded, you will need a recording application with a monitoring feature.

        Answered on 4/28/2015 by AudioSolutionsSpec1 from Stow,OH
    • Q:

      Can the BPHS1 be connected to computer via usb?
      Asked on 4/11/2014 by KCDelta from Oregon

      1 answer

      • A:

        Thank you for your inquiry. You would need a USB audio interface for this. Please note that we do not manufacture these interfaces.

        Answered on 4/21/2014 by AudioSolutionsManager from Stow, OH
    • Q:

      Can I get an extension cord for ath ws55 headphone?

      I need more like 10 feet. Or do I need to go wireless?
      Asked on 1/5/2013 by Cbone0 from Eagan, MN, USA

      1 answer

      • A:

        The BPCB1 will not work with the ATH-WS55.

        If you would like to extend the length of your headphones, you will need to get a headphone extender cable. Those will likely be available at a local electronics retailer.

        Thanks!

        Answered on 1/10/2013 by AudioSolutionsSpec2 from Stow, OH
    Displaying questions 1-4

    Do you have a question about this product?