Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:is it compatible with atw-t310
A:Thanks for your inquiry. Yes, the AT-GRcW is compatible with ATW-T3110.
Q:Is this compatible with the ATW-T1001 model?
Q:Is this cable available in a shorter length? (12 to 14")
Q:Is this cable compatible with my atw-t27 transmitter
A:Yes it is compatible. The cable will have a 4-pin female connector on it that will mate with the 4-pin male connector on the T27 Transmitter. If this is the first time an instrument (instead of a microphone) is being used with the transmitter, make certain you adjust the input level by turning the GT control located in the battery compartment just above the battery. Monitor the AF Level or AF Peak indicator on the receiver to make certain the instrument/transmitter signal is not overdriving the receiver.
Q:What is the pin wiring for the locking connector on AT-GRcW
A:Thank you for your inquiry. Pin 1 is ground and connects to ring, Pin 2 is hi-Z audio and connect to tip. Pins 3 and 4 are open.
Q:Does the AT-GCrW work with acoustic guitars?
A:Thank you for your inquiry. You will need to configure the transmitter to be used with an instrument. Scroll through the menu options of the transmitter. It is currently set to mic. Following the instructions in your manual change it to instrument.
Q:Can the guitar wireless cable be adapted down to a stereo 1/8 inch plug so as to play sound from a computer headphone port?
A:Thank you for your inquiry. Yes it can, but remember the output from your computer is stereo, so you may need to sum both left and right output with the proper adapter.