ATW-CHG2

Two-Bay Recharging Station (2000 Series)

MSRP* US$279.00
Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Downloads
  • Reviews
  • Q & A

  • Overview

    New to the 2000 Series, this two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a UniPakŪ transmitters in any combination. Maintenance charging prevents battery self-discharge until the transmitter is removed from charger. The charger draws power from a standard wall outlet.

  • Features


    • NiMH batteries are charged within the transmitters

    • Versatile unit charges ATW-T220a handheld transmitters and/or ATW-T210a UniPakŪ transmitters (in any combination)

    • Built-in safety feature monitors cell voltage and automatically turns off the unit if problems are detected

    • Automatic shut-off if alkaline (non-rechargeable) batteries are installed

    • Automatic shut-off if damaged batteries are installed

    • Maintenance charging prevents battery self-discharge until the transmitter is removed from charger

  • Downloads

    ATW-CHG2 Manual (pdf 738.64 KB)
  • Reviews

    REVIEW SNAPSHOT®

    by PowerReviews
    Audio-TechnicaATW-CHG2 Two-Bay Recharging Station (2000 Series)
     
    5.0

    (based on 1 review)

    Ratings Distribution

    • 5 Stars

       

      (1)

    • 4 Stars

       

      (0)

    • 3 Stars

       

      (0)

    • 2 Stars

       

      (0)

    • 1 Stars

       

      (0)

    Reviewed by 1 customer

    Displaying review 1

    Back to top

     
    5.0

    Wonderful --Microphones are always ready to use!

    By 

    from Akron,Oh 44319

    Site Member

    Pros

      Cons

        Best Uses

          Comments about Audio-Technica ATW-CHG2 Two-Bay Recharging Station (2000 Series):

          Never need to check batteries. Just wish they had upgraded the 3000 series wireless to use this system..

          • What best describes the environment the product was used in?:
          • Expert
          • What best describes your level of audio knowledge?:
          • House of Worship
          • How long have you used this product?:
          • Up to a year
          • Reliability:
          •  
          • Durability:
          •  
          • Ease of Use:
          •  

          Displaying review 1

          Back to top

        • Q & A

          Do you have questions about this product?

          Get answers from real customers and in-house experts with AnswerBox.

          5 Questions | 5 Answers
          Displaying questions 1-5
          • Q:

            height dimension with HH transmitters in bay

            How tall is it with handhelds in it?
            Asked on 11/25/2013 by Rothsound from Mt. Pleasant MI

            1 answer

            • A:

              Thank you for your inquiry. From the table top to the very end of the hand held microphone is 10.5 inches.

              Answered on 12/3/2013 by AudioSolutionsManager from Stow, OH
          • Q:

            where in sacramento can i buy this charger (ATW-CHG2

            IT'S FOR WIRELESS MIC (ATW-T220a)
            Asked on 12/11/2012 by D8V2 from Sacramento, CA, USA

            1 answer

            • A:

              Thank you for your inquiry. Please visit our home page and on the left hand side you will find a dealer locator. Enter your zip code and you will be provided with a list of dealers in your area.

              Answered on 12/14/2012 by AudioSolutionsManager from Stow, OH
          • Q:

            Will the ATW-T220a handheld transmitters work with the othe wireless systems like the 3000 & 4000 series systems?
            Asked on 10/18/2012 by Marc from Michigan, USA

            1 answer

            • A:

              No it will not. The ATW-T220a Handheld Miicrophone/Transmitter does not operate at the same pilot tone frequency as a 3000 or 4000 Series Wireless system and therefore will not open the tone lock squelch on a 3000 or 4000 Series Receiver. This prevents the actual audio signal from being processed.

              Answered on 10/19/2012 by AudioSolutionsSpec1 from Stow,OH
          • Q:

            Can the ATW-2000 belt pack Tx be used while in the charger

            The intention is use two belt pack Txs ( AT-ATW-T210a) connected to two gooseneck Electret Mics (ES N915H units) in an installed configuration in a lectern.
            Alternatively to connect in a 2 channel, phantom power mixer/combiner and transmit on one beltpack Tx.
            It would be desirable to have the Beltpack(s) Tx semi-permanently mounted, ie not moved from the ATW-CHG2 charger.

            Nigel.
            Proprietor
            Audio Visual Technologies
            Asked on 3/26/2012 by AVTA from Armidale NSW 2350, Australia

            1 answer

            • A:

              Thank you fro your inquiry. The transmitters will shut down while be charged, so they can not be use while in the charger.

              Answered on 4/5/2012 by AudioSolutionsManager from Stow, OH
          • Q:

            Will ATW-220 mics recharge in the ATW-CHG2 or must they be the ATW-220a?
            Asked on 2/23/2012 by Difference

            1 answer

            • A:

              Thank you for your inquiry. Only the "a" version transmitters will work in the charger.

              Answered on 3/5/2012 by AudioSolutionsManager from Stow, OH
          Displaying questions 1-5

          Do you have a question about this product?