ATW-T1007

Microphone Desk Stand Transmitter for System 10 PRO

MSRP* US$349.00

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Downloads

  • Overview

    Designed to work with phantom-powered, condenser gooseneck microphones with a 3-pin XLRM-type output, the ATW-T1007 System 10 Microphone Desk Stand Transmitter pairs with the System 10 or System 10 PRO digital wireless receiver of your choice to provide rock-solid, 2.4 GHz wireless performance. The transmitter is equipped with a 3-pin XLRF-type input, and features a touch-sensitive user switch that can toggle between talk and mute modes, or function as a press-to-talk or press-to-mute button. Two red/green LEDs one visible from the front of the unit, the other from the rear indicate toggle/talk/mute mode, battery level, and charging status.

    The ATW-T1007 also offers three levels of input gain (-6 dB, 0 dB and +6 dB), which can be selected via a switch on the bottom of the unit. Another switch engages the low-cut filter. The 3.7V rechargeable lithium-ion battery provides nine hours of use on a full charge and is easily recharged with the included USB charging cable.


  • Features

    • Pairs with any System 10 or System 10 PRO digital wireless receiver

    • 3-pin XLRF-type in for quick mounting of gooseneck microphone

    • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance

    • Operates in the 2.4 GHz range completely free from TV interference

    • User switch can be set to toggle between talk and mute modes, or function as a press-to-talk or press-to-mute button

    • Gain Control switch allows selection of three input gain levels: -6 dB (for loudest voices), 0 dB and +6 dB (for softest voices)

    • Two red/green LEDs one visible from the front of the unit, the other from the rear indicate toggle/talk/mute mode, battery level, and charging status

    • Switchable low-cut filter

    • System ID Display located on bottom of unit

    • Automatic frequency selection for seamless, interference-free operation


    Specifications:
    RF Power Output: 10 mW
    Spurious Emissions: Following federal and national regulations
    Power Supply: 100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type power supply
    Battery: 3.7V rechargeable lithium-ion battery
    Battery Life: 9 hours
    Charging Time: Approx. 4.5 hours (for 0-100% charge)
    Switches: Touch-sensitive, capacitive-type user switch function: toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: -6 dB, 0 dB, +6 dB
    Dimensions: 96.8 mm (3.81") W 44.2 mm (1.74") H 122.8 mm (4.83") D
    Net Weight: 420 g (14.8 oz)
    Accessories Included: AC Adaptor (USB-type), USB charging cable
  • Downloads

    ATW-T1006 and ATW-T1007 Boundary and Desk Stand Transmitter Manual (pdf 496.44 KB)
    System 10 PRO Transmitters Literature Sheet: ATW-T1006 & ATW-T1007 (pdf 260.46 KB)
    ATW-T1007 Submittal Sheet (pdf 171.91 KB)