Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Which Joining plate do I use to join a 3000 transmitter with a ATW-DA49?
A:You may order the AT8630 through an Authorized Audio-Technica Dealer.
Q:What is the part number for a replacement power supply?
A:There are two pieces to the power supply for the ATW-DA49 Antenna Distribution system. The AC line cord is detachable and therefore is one piece. The part number for the AC Line Cord only is 960002230. The part number for the Switching Power Supply only is P11686.
Q:Is there a way to support 6 wireless receivers using one ATW-DA49?
A:There is no way to use one ATW-DA49 with 6 receivers. To support up to 7 receivers with one set of antennas, then two DA49's would be needed.
Q:When joining two DA-49 together with the 8630 plate can I still mount the 2 antennas on the front on the short ears?
A:You would need one standard long ear, and the long ear from the RM1 (included with the DA49) to front mount the antennas in the configuration you'd like.
Q:Do you need dummy loads on the DA49?
A:You can connect up to 4] Audio-Technica wireless receivers to one ATW-DA49. You do not need a "dummy load" for any unused DA49 outputs.
A:Thank you for your inquiry. Please contact our Audio Solutions team at 330-686-2600 ext 5000 and they can help with this.
Q:Powered or Active antenna
A:Thank you for your inquiry. Any UHF passive or active antenna with work with the ATW-DA49 withing the range 440-900 MHz . Please note that if using active antenna you must turn on antenna power inside the unit. Our models of active antenna are the ATW-A54P (500 MHz) and the ATW-A64P (600 MHz)
Q:How efficient is the ATW-DA49 for Band C vs. the AEW-DA550C
A:Thank you for your inquiry. The AEW-DA550C is filtered to work only with the C band and the AEW-DA6660 is filieterd to work with the D band only. The ATW-DA49 is wide band and will work well when mixing bands. Please note when mixing bands make sure that you also use wide band antenna such as out ATW-A49.
Q:Is there a joining plate available to mount two ATW-DA49 units side by side in a rack?
A:Thank you for your inquiry. Yes, the AT8630 joining plate is designed for use with the ATW-DA49
Q:How many ATW-DA49 Antenna Distribution Units can be linked together without loss?
A:Thank you for your inquiry. You can use one ATW-DA49 as a hub and connect 4 other ATW-DA49's to it via the receiver ports for a total of 16 wireless systems. The antenna would connect to the hub ATW-DA49. Please note that you cannot connect a third level of ATW-DA49's because the signal loss would be significant.