Power Module with Dante™ Network Output

Five-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • Overview
  • Features
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview

    The ATND8734 is a Dante-enabled wall/ceiling plate power module designed for use with compatible microphones that have a TA3F-type connector, including the ES931/MIC and ES933/MIC. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable.

    The power module is equipped with an 80 Hz low-cut UniSteep® filter that permits the choice of flat response or low-frequency roll-off, three-position input gain level selector (+30 dB, +40 dB, and +50 dB), and a red/green LED status indicator. These are all controlled remotely via third-party software.*

    The ATND8734 features a circular cover plate that can be removed and painted with commercially available spray paint.

    * For a list of compatible third-party software consult the About Network Audio page.
  • Features

    • Connects directly to network via Ethernet cable – no need for expensive audio cable or soldering

    • TB3M-type input for quick mounting of microphone

    • Red/green LED indicator

    • Input gain, low-cut filter and LED indicator ring are controlled remotely

    • Logic input accepts external switch for connection to the Dante network

  • Specifications

    Frequency Response 20-20,000 Hz
    Input Connector TB3M-type
    Output Connector RJ45
    Weight 330 g (11.6 oz)
    Dimensions 148.0 mm (5.83") diameter,
    47.0 mm (1.85") depth
    Notes Low frequency roll-off:
    80 Hz, 18 dB/octave
    Maximum input levels:
    -15 dBu @ +30 dB gain
    -25 dBu @ +40 dB gain
    -35 dBu @ +50 dB gain
    Accessory included:
    Fixing screw x 4

  • Downloads

    ATND8734 Power Module Submittal Sheet (pdf 143.15 KB)
    ATND8734 FCC DOC (pdf 253.73 KB)
  • Reviews

  • Q & A