|Type||Closed-back Dynamic (Headphone)
Cardioid Dynamic (Microphone)
|Driver Diameter||40 mm (Headphone)|
|Voice Coil||Copper-clad aluminum wire|
|Frequency Response||20-20,000 Hz (Headphone)
40-20,000 Hz (Microphone)
|Maximum Input Power||1,600 mW at 1 kHz|
|Sensitivity||100 dB (Headphone)
-57 dB (1.4 mV) re 1V at 1 Pa (Microphone)
|Impedance||65 ohms (Headphone)
560 ohms (Microphone)
|Weight||264 g (9.3 oz)|
|Dimensions||82.0 mm (3.23") wide (earcup);
46.0 mm (1.81") wide (headband);
180.1 mm (7.09") long (boom), microphone extended;
24.0 mm (0.94") diameter (microphone)
|Cable||2 m (6.6') long with 8-pin connector at headset end; 4-pin XLRF-type connector output|
|Accessories Included||3 windscreens; spare connector screw|
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about Audio-Technica BPHS1-XF4 Communications Headset:
stands up to the elements like hot, cold. In use for over 200 games since purchased. still superior sound qality
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Looking to replace the cord for the BPHS1-XF4 Communications Headset. where can I buy one.
A:Try performanceaudio.com . The part number for the cable only is BPCB4.
Q:Do I need any additional accessories or converters to use this on a PC?
A:With the right supplies you can make one, All you need is a female xpr plug, a length of audio wire and a stereo 3.5 plug.
A:It would be much easier to adapt the BPHS1 with the XLR microphone output connector and the 1/4' headphone plug to a computer. The Hosa XVM-101F Adapter Cable will adapt the XLR mic connector to a 3.5 mm stereo mic input jack on a computer. The 1/4" headphone plug can be reduced to a 3.5 mm (stereo) plug by using a simple slip-on type adapter such as that available from your local Radio Shack store.
Q:Headset for manufacturing
A:Thank you for your inquiry. It would if it is connected to the proper communication system. The microphone on its own will not provide this function.
Q:wind noise onmy audio-technica headset
A:Thank you fro your inquiry. We provide a windscreen with the microphone that can help in low wind scenarios. There may be some third party windscreens that can provide additional protection. Check with company called Rycote at http://www.rycote.com/products/ who specialize in windscreens.
Q:Concerning the BPHS1-XF4 Communications Headset, can this be used to conduct conversations using a model phone?
A:Thank you for your inquiry. The BPHS1-XF4 is not designed for phone use.
Q:BPHS1-XF4 Communications Headset: Could this headset be adapted for use with a USB port?
A:Thank you for your inquiry. There is no off the shelf way to do this that I am aware of.