|Type||Belt drive turntable, fully automatic|
|Speeds||33-1/3 RPM, 45 RPM|
|Wow and Flutter||Less than 0.25% (WTD) @ 3 kHz (JIS)|
|Signal-to-Noise Ratio||>50 dB (DIN-B)|
|Output Level||Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
|Phono Pre-Amp Gain||36 dB nominal, RIAA equalized|
|Power Supply Requirements||120V AC, 60 Hz, 3W|
|Dimensions||360.0 mm (14.17") W x 97.5 mm (3.84") H x 356.0 mm (14.02") D|
|Weight||2.98 kg (6.6 lbs.)|
|Accessories Included||Dual RCA (female) to 3.5 mm (1/8") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8") mini-plug (female) stereo adapter cable; 45 RPM adapter|
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about Audio-Technica AT-LP60BL Fully Automatic Stereo Turntable System:
Great balance between cost and benefits. Nice appearance. Easy to set up and to use.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:I purchased this turntable and need some assistance. What do I need to get it to connect to the following audio receiver: ONKYO TX-NR609. Thank you!
Q:I have this player, and after 4 years it's bugged out on me. I think I need to take it to a repair shop to get checked out. Do you guys have repair shops in the Brooklyn or NY area that I can take it to that are authorized by you guys to see what's going on with it?
A:You can send it in to our Service department where they will quickly get it back up and running! You can find all information here: www.audio-technica.com/service
Q:Does the lid being open change the dimensions?
A:Yes, the specified dimensions are with the dust cover closed.
Q:Is there a way to adjust the speed? Ours has always played just a litte too fast.
A:To receive assistance with your product, please contact the Audio-Technica United States (ATUS) Audio Solutions Team at:
Q:Is it semi-automatic (manual start, auto return) or fully automatic (auto start and return) or switchable between the two?
A:The AT-LP60 / AT-LP60-USB is a Fully Automatic Stereo Turntable. However, it can be manually started by engaging the tonearm lift so that you can manually cue the tonearm over a record. The tonearm will automatically return to its rest position when the record is finished, whether one uses the start button or manually cues the tonearm.
Q:Is the cartridge replaceable/upgradeable?
A:To receive an answer to your question, please contact the Audio-Technica United States (ATUS) Audio Solutions Team at:
Q:the drive motor is not spinning when i turn hit start. Any suggestions
A:The number one reason for this is an improper belt placement.
Q:Do I need additional speakers?
A:There are no speakers, so yes you will need speakers in some form. The simplest way to get your turntable going is to connect it to a pair of powered (may also be referred to as "active") type speakers.
Q:I purchased this for my daughter along with Alesis M1A320USB Nearfield Studio Monitors with USB Audio I/O. Do I need anything else to be able to use this product out of the box (i.e. -'an adapter of some kind between the speakers and the unit itself)? Also, will any speakers work? Looking to use this alone, not with a computer.
A:You do not need anything else. Use the dual RCA female to single 3.5mm stereo male adapter cable that is provided with the turntable to connect the turntable to the 3.5mm (1/8 in) Audio Input jack on the speakers. Make certain that the preamp selector switch located on the rear of the turntable is placed in the LINE position.
Q:Is this the same Blue as the Discontinued ATH-M50xBL Professional Headphones - Blue?
A:No, they are two different shades of blue.