AT-PL120 Direct Drive Professional Stereo Turntable System (DISCONTINUED)

See A-T’s newest turntable, the AT-LP120-USB.

This professional stereo turntable features a high-torque direct-drive motor for quick start-ups and a selectable internal stereo phono pre-amplifier that allows the turntable to plug directly to computers and other components with no dedicated turntable input. Other features include: forward and reverse play capability; cast aluminum platter with slip mat and a start/stop button with remote start/stop input; three speeds 33/45/78; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% or +/-20% adjustment ranges; and removable hinged dust cover. A replaceable Audio-Technica ATP-2 cartridge is included.

Direct drive high-torque motor

Selectable 33/45/78 RPM speeds

Selectable internal stereo phono pre-amplifier

S-shaped tone arm assembly with:
- Adjustable counterweight
- Anti-skate adjustment
- Tone arm height adjustment and lock
- Tone arm lift with hydraulic action and lift lever
- Tone arm rest with locking mechanism

Selectable high-accuracy quartz-controlled pitch lock

Selectable +/-10% or +/-20% pitch adjustment ranges

Stroboscopic platter speed indicator

Forward and reverse play

Cast aluminum record platter with slip mat

Start/stop button with remote start/stop input

Pop-up stylus target light

45-RPM adapter with storage receptacle

Receptacle for extra headshell

Adjustable feet for leveling

Removable hinged dust cover

Includes professional cartridge ATP-2

SPECIFICATIONS
Type	3-speed, fully manual operation
Motor	DC motor
Drive Method Direct Drive	Direct drive
Speeds	33-1/3 RPM, 45 RPM, 78 RPM
Pitch Variation	+/-10% or +/-20%
Turntable Platter	Die-cast aluminum
Starting Torque	>1.6 kgm-cm
Braking System	Electronic brake
Wow and Flutter	<0.2% WRMS (33 RPM)
Signal-to-Noise Ratio	>50 dB
Output Level	Pre-amp "Off": 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp "On": 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain	38 dB nominal, RIAA equalized
Pitch Output	Output signal to drive remote pitch indicator 2.5V square wave signal 675 Hz +/- 1 Hz for 33 and 45 RPM quartz locked speeds Varies from 540 Hz - 810 Hz when +/- 20% pitch is selected Varies from 607 Hz - 742 Hz when +/- 10% pitch is selected 1170 +/- 1 Hz for 78 RPM
Remote Start/Stop	2 conductor 1/4" connector (T/S) Normally open contact closure
Power Supply Requirements	115/230V AC, 50/60 Hz
Power Consumption	13W
Dimensions	17.75" (450 mm) W x 13.88" (352 mm) D x 6.0" (157 mm) H
Weight	23.4 lbs. (10.6 kg)
Accessories Included	Headshell/cartridge (ATP-2); AC line cord; 45 RPM adapter