Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:I have a Pro37R which I've been using for sampling in my teaching studio for many years, but the windscreen fell apart. Which model of current windscreen will fit this mic the best?
A:The replacement windscreen for the PRO37R is the AT8129.
Q:what is the size of this windscreen. Is it compatible with ATR3350is
A:The AT8129 will fit the ATR3350is.
Q:Caan I use this foam for the microphone Pro35?
A:The Windscreens for the PRO35 microphone are:
Q:I need to replace the windscreen for my AT8532. Which one will fit? (Thank-you)
A:AT8532 is the model number of an associated power module, not the model number of actual microphone. However, your microphone may be an ATM35 CLip-on Instrument Microphone. If so, the Windscreen (which is held in place by the flexible mount) is a part which is available from our Parts Department. Please verify that the Microphone is an ATM35 model microphone and contact our Parts Department at (330) 686-2600 ext 5002 or at email@example.com to purchase a replacement Windscreen.
Q:I need to replace the windscreen for my microphone (AT829)
A:Thank you for your inquiry. You need the AT8131 windscreen available from any of our dealers.
Q:Looking for a windscreen for a Pro42CM microphone
A:The stock windscreen for the PRO 24-CM is available through the Audio-Technica Parts Department. If you are looking for a more extensive windscreen, you may purchase one through Rycote, link below:
Q:Windscreen for a JVC GR-S505 SVHS-C Camcorder
A:Thank you for your inquiry. I do not believe this will work with your microphone it is less than 1/2 inches in diameter and less than 2 inches. I suggest checking with the folks at Rycote.com. They specialize in windscreens and may have what you need.
Q:I am looking for a replacement windscreen that would fit a Sony ECM-DS30P Electric Condenser Microphone
A:Thank you for your inquiry. The AT8154 would fit the diameter of the mic but it would be a bit to long. You could easily cut it to the length that you need.