AT8410a

Microphone Shock Mount

MSRP* US$49.00
Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Notes
  • Downloads
  • Reviews
  • Q & A

  • Overview


    • Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts

    • Spring-clip fits most tapered and cylindrical microphones

    • Permits easy microphone insertion and removal without detaching mic cable

    • Compatible with 5/8"-27 threaded stands


    Fits Audio-Technica Case Style(s): S1, S2, S3, S4, S7, S8, S9, S10, S11, S12, S13, S14, SG1, SG2, SG3, SG4, SG5, T1, T2, T3, T4, T5, T6, T7
  • Notes



    AT8410a Specifications
    Height: 5.23" (133.3 mm)
    Ring Diameter: 3.11" (79.0 mm)
    Minimum Microphone Diameter: 0.66" (16.8 mm)
    Maximum Microphone Diameter: 1.13" (28.8 mm)
    Net Weight: 6.3 oz (179 grams)


    Conditions
  • Downloads

    AT8410a, AT8415 Specification Sheet (pdf 137.48 KB)
  • Reviews

    REVIEW SNAPSHOT®

    by PowerReviews
    Audio-TechnicaAT8410a Microphone Shock Mount
     
    4.0

    (based on 1 review)

    Ratings Distribution

    • 5 Stars

       

      (0)

    • 4 Stars

       

      (1)

    • 3 Stars

       

      (0)

    • 2 Stars

       

      (0)

    • 1 Stars

       

      (0)

    Reviewed by 1 customer

    Displaying review 1

    Back to top

     
    4.0

    very good product ... but expansive !

    By 

    from Quebec, Canada

    Pros

    • Compact
    • Easy To Use
    • Versatile

    Cons

    • Overpriced in my opinion

    Best Uses

      Comments about Audio-Technica AT8410a Microphone Shock Mount:

      I just LOVE AT microphones, now you know ! AT 8410a is good ... but pricey.

      I use it since many years: 2 x 4050, 2 x 4041, and 1 4040; and looking for a 4033 ! They are very good overall value and always good to very good results with that. The only negative point for me is the overpriced accessories ... like shock mounts. I had to buy on for a 20 years old 4050 : $$ ! And I need a AT 8410a for one of my 4041, and feel it pricy too ... And at last : if the elastic band is worn one one of these shock mount, you have to know that it is easy to buy a couple of feet of elastic band, and repair it yourself like I did ;-)

      • What best describes the environment the product was used in?:
      • Studio Musician
      • What best describes your level of audio knowledge?:
      • Intermediate
      • How long have you used this product?:
      • Over a year
      • Reliability:
      •  
      • Audio Quality:
      •  
      • Durability:
      •  
      • Ease of Use:
      •  

      Displaying review 1

      Back to top

    • Q & A

      Do you have questions about this product?

      Get answers from real customers and in-house experts with AnswerBox.

      15 Questions | 15 Answers
      Displaying questions 1-10Previous | Next »
      • Q:

        Will this work with the AT-875R microphone?
        Asked on 9/14/2016 by Erin from Helena, MT

        1 answer

        • CUSTOMER CARE

          A:

          Thank you for your inquiry. Yes this will work with the AT-875R.

          Answered on 9/14/2016 by ATUS_Specialist4 from Stow,OH
      • Q:

        I am looking for replacement parts ?
        Asked on 7/8/2016 by Jeff from Montreal QC.

        1 answer

        • Staff Reviewer

          A:

          For replacement parts, contact Parts@atus.com

          Answered on 7/14/2016 by ATUS_Specialist4
      • Q:

        what mount would i need for a AT2020 usb plus ?
        Asked on 4/1/2016 by chase from Duncan Ok

        1 answer

        • Staff Reviewer

          A:

          The AT8471 would be the best choice for you!

          Answered on 4/7/2016 by ATUS_Specialist4
      • Q:

        What mount would i need for the AT2035?
        Asked on 3/11/2016 by Nik

        1 answer

      • Q:

        Will it work on an AT4033A? Tnx
        Asked on 2/26/2016 by Stan

        1 answer

      • Q:

        Will the AT8410a work with the AT815a microphone? I have an AT8415 shock mount attached to a boom and it is very noisy and isn't a secure fit at all. I've used gaff tape to try to hold it in place but that only helped a little. Thank you.
        Asked on 9/1/2015 by Joe Mtz from Santa Fe, NM

        1 answer

        • Staff Reviewer

          A:

          Yes, the AT8410a will fit the AT815a.

          Answered on 9/3/2015 by ATUS_Specialist3
      • Q:

        What shock mount do I use with the Audio Elite 6100 mic?

        I mounted 4 AE 6100 mics on articulating arms for recording a radio show. Every time I touch the desk, the vibration is picked up by the mic. What shock mount would eliminate this problem?
        Asked on 3/23/2015 by Dustin from Fair Oaks, CA

        1 answer

        • A:

          Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for assistance with this.

          Answered on 3/24/2015 by AudioSolutionsSpec3
      • Q:

        Will shock mount fit at875r ?
        Asked on 9/17/2014 by Soulmen13

        1 answer

        • A:

          Thank you for your inquiry. Yes, this mount will work for the AT875r.

          Answered on 10/6/2014 by AudioSolutionsManager from Stow, OH
      • Q:

        Will this shock mount work with the at2005?
        Asked on 1/10/2014 by kevinrutherford from Oregon, USA

        1 answer

        • A:

          The AT8410a will NOT work with the AT2005USB.

          The shock-mount for the AT2005USB is the AT8415.
          http://www.audio-technica.com/cms/windscreens_mounts/bda042714ac39d81/index.html

          Thanks!

          Answered on 1/16/2014 by AudioSolutionsSpec2 from Stow, OH
      • Q:

        SCrew missing on shock mount

        I own 2 AT8410a microphone shock mounts. One of them is missing the little black Phillips head screw that secures the microphone clip to the main housing, which is then secured to the outer ring via the elastic bands. Can you send me, or do you know where to get a little screw like that? What is the exact size if you cannot provide me with a screw or place to get a new one? It appears to be the same size screw as the screws on the outer ring that hold the inner ring in place, which secures the elastic bands. And do you have or know where to get new elastic bands? I also need them for my C 414 shock mount.
        Asked on 10/6/2013 by Davey from Brooklyn, NY, USA

        1 answer

        • A:

          Thank you for your inquiry. Please contact our parts department at 330-686-2600 option 4. They can help with this.

          Answered on 10/10/2013 by AudioSolutionsManager from Stow, OH
      Displaying questions 1-10Previous | Next »

      Do you have a question about this product?