BP892c-TH MicroSet®

Subminiature Omnidirectional Condenser Headworn Microphone

MSRP* US$419.00
Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview


    BP892 Subminiature Omnidirectional Condenser Headworn Microphone, less power module. 1.4 m (55") permanently attached miniature cable, unterminated. Includes AT8440 cable clip, AT8464-TH dual-ear microphone mount, two AT8157-TH windscreens, two AT8156-TH element covers, a moisture guard, and a carrying case. See BP892-TH for more details.
  • Features


    • Handles high sound pressure levels with ease

    • Extremely intelligible natural audio

    • Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility

    • Ergonomic under-ear design—flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses

    • Comes equipped with AT8464-TH Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort

    • Available in black and beige, wired and wireless models; See BP892-TH for more details

  • Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNOmnidirectional
    FREQUENCY RESPONSE20-20,000 Hz
    OPEN CIRCUIT SENSITIVITY–49 dB (3.5 mV) re 1V at 1 Pa
    MAXIMUM INPUT SOUND LEVEL135 dB SPL, 1 kHz at 3% T.H.D.
    SIGNAL-TO-NOISE RATIO63 dB, 1 kHz at 1 Pa
    CURRENT CONSUMPTION0.1 mA typical at 5V (wireless only)
    VOLTAGE RANGE2.5-11V (wireless only)
    WEIGHT (MICROPHONE)Microphone, boom & earpiece: 2.6 g (0.09 oz)
    DIMENSIONSMicrophone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
    Boom: 98.4 mm (3.87") long, 1.07 mm (0.04") diameter
    CABLE1.4 m (55"), unterminated
    ACCESSORIES FURNISHEDBP892c: AT8440 cable clip; AT8464 dual-ear microphone mount; two AT8157 windscreens; two AT8156 element covers; moisture guard; carrying case
    BP892c-TH: AT8440 cable clip; AT8464-TH dual-ear microphone mount; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; carrying case
    AUDIO-TECHNICA CASE STYLEM31
    Click on the chart to view the larger image
    POLAR PATTERN
    POLAR PATTERN
    FREQUENCY RESPONSE
    FREQUENCY RESPONSE



    Conditions
  • Downloads

    BP892 MicroSet Specification Sheet (pdf 548.69 KB)
    Optional Windscreens / Mounts
  • Reviews

  • Q & A

    Do you have questions about this product?

    Get answers from real customers and in-house experts with AnswerBox.

    5 Questions | 5 Answers
    Displaying questions 1-5
    • Q:

      Which power module and transmitter should I use?

      I recently purchased a BP892 omnidirectional with dual ear mount. It did not come with power module or transmitter. What do recommend for these? What do I still need to make this operational? I am an amateur with this equipment.
      Asked on 12/30/2013 by MsEubanks from Michigan

      1 answer

      • A:

        The BP892c is bare-wire, and does not come with a power-module or transmitter. Since it comes un-terminated (without a connector), it is up to the user to specify their own wireless-type connector.

        If you are looking to use a BP892 in either a wired or wireless application, please contact the Audio-Technica Audio Solutions Team at audio-solutions@atus.com. In your email inquiry, please state what you are trying to connect to. This might entail recommending a different version of the BP892 to more specifically meet your application needs. Additionally, if you are looking to purchase a wireless system, please provide information about any existing systems you might have, your application of use, how many wireless systems you'd like to operate simultaneously, the zip code of use (so that we can scan your area for available frequencies), and any other relevant information related to your setup.

        Thanks!

        Answered on 1/3/2014 by AudioSolutionsSpec2 from Stow, OH
    • Q:

      What transmitter would work with this mic? I have had one for a few years but am afraid it was misplaced after a recent move!

      Model AT892-TH
      Asked on 7/17/2013 by dadof5boys from Tennessee, USA

      1 answer

      • A:

        Thank you for your inquiry. There are several versions of this microphone, but the one you listed is unterminated (it does not have a connector)

        Answered on 7/29/2013 by AudioSolutionsManager from Stow, OH
    • Q:

      The flexible rubber around the earpiece has deteriorated as well as the 'cap' that protects the end of the earpiece. Is there a replacement available?

      The microphone still works fantastic.
      Asked on 11/18/2012 by mandoman from Wisconsin

      1 answer

      • A:

        The element covers/caps for the BP892 are the AT8157 (add a "-TH" for Beige). You could purchase/order one at any Authorized Audio-Technica Dealer. There is a dealer locator on the Audio-Technica homepage, www.audio-technica.com.

        As for the flexible rubber around the earpiece, please contact the Audio-Technica Service Department regarding this inquiry.

        service@atus.com

        Thanks!

        Answered on 11/30/2012 by AudioSolutionsSpec2 from Stow, OH
    • Q:

      BP892cW-th accessories application.

      The BP892cW-th comes in a case with numerous accessories. The identification and use of the "windscreen" seems to be simple enough (tubular sponge applied over the end of the microphone) but the matter of the "element cover" and "moisture guard" is not as easily understood by all. It might be helpful if the function and proper placement of each part were to be described for the end user. Maybe include this under "Home : Support : Using Microphones : A Brief Guide to Microphones : Some Useful Accessories"?
      Asked on 11/12/2012 by novatek from Canada

      1 answer

      • A:

        Thank you for your inquiry. The element cover does actually cover the element. The moisture guard slides on to the boom of the microphone to keep sweat from running into the element.

        Answered on 12/10/2012 by AudioSolutionsManager from Stow, OH
    • Q:

      Trouble Shooting

      My BP892 has started to act up on me. I think the element in the tip has come loose. Sometime it will work & other times it won't or it will come off & on & off & on etc.
      When I touch the time it will do the same thing.
      Help ?
      Other than that,
      I LOVE MY MIC :)
      Asked on 11/24/2011 by Wulf from Tulsa, OK, USA

      1 answer

      • A:

        Thank you for your inquiry. It appears that you need to talk with our service department. Please contact them at 330-696-2600 option 4.

        Answered on 11/28/2011 by AudioSolutionsManager from Stow, OH
    Displaying questions 1-5

    Do you have a question about this product?