|ELEMENT||Fixed-charge back plate, permanently polarized condenser|
|FREQUENCY RESPONSE||20-20,000 Hz|
|OPEN CIRCUIT SENSITIVITY||–49 dB (3.5 mV) re 1V at 1 Pa|
|MAXIMUM INPUT SOUND LEVEL||135 dB SPL, 1 kHz at 3% T.H.D.|
|SIGNAL-TO-NOISE RATIO||63 dB, 1 kHz at 1 Pa|
|CURRENT CONSUMPTION||0.1 mA typical at 5V (wireless only)|
|VOLTAGE RANGE||2.5-11V (wireless only)|
|WEIGHT (MICROPHONE)||Microphone, boom & earpiece: 2.0 g (0.07 oz)|
|DIMENSIONS||Microphone: 6.5 mm (0.26") long, 2.8 mm (0.11") diameter
Boom: 107.4 mm (4.23") long, 1.09 mm (0.04") diameter
|CABLE||1.4 m (55"), unterminated|
|ACCESSORIES FURNISHED||BP894c: AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8163 windscreens; moisture guard; carrying case
BP894c-TH: AT8464-TH dual-ear microphone mount; AT8440 cable clip; two AT8163-TH windscreens; moisture guard; carrying case
|Click on the chart to view the larger image|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Can the microphone be used with a ATW-T1001 transmitter?
Q:Where can I find replacement wind screens for these 894 cW units.
Q:How does the "rotating capsule housing" actually rotate? I don't want to break anything and I can't tell if I'm just supposed to rotate it or remove it first. The microphone is new so I don't know if it supposed to be stiff or there is another way to rotate it.
A:Thank you for your inquiry.
Q:What is the part # for the BP894c with Sennhizer mini jack connector in beige
A:The BP894c will NOT work with Sennheiser wireless systems. The two main reasons are that the "c" version is un-terminated (has no connector; bare-wire), and because A-T microphones made for Sennheiser function as 2-wire microphones, whereas all other versions are 3-wire.