AT895 Adaptive-array Microphone System (DISCONTINUED)
A New Standard in Audio Acquisition
AT895 Systems incorporate a revolutionary DSP-controlled five-element microphone array that provides adaptive directional audio acquisition.
Utilizing Audio-Technica's proprietary DeltaBeam® technology, the AT895 System manipulates and filters the output of the array by acoustical, analog and digital means. This process enhances the pickup of a sound source from a desired direction relative to unwanted background noise or interference, providing cancellation of up to 80 dB. Background interference, mechanical noise, wind noise, proximity effect – all are minimized automatically. And, unlike some attempts at directive devices, the audio quality remains wideband and natural.
The AT895 functions equally well for handheld interview use or long-range sound pickup – in the field, in the studio, or in security operations.
The Basic System
Two components are at the heart of every AT895 System: the AT895 Microphone and the AT895CP Control Pack.
The AT895 Microphone itself is "all analog," housing one Audio-Technica MicroLine® element, four A-T cardioid elements mounted in a co-planar diamond configuration, and five mic preamps. The five amplified analog signals from the microphone elements are sent individually down a special detachable cable to the AT895CP Control Pack.
The AT895CP Control Pack provides all the power, Digital Signal Processing, and control for the AT895. Output from the Control Pack is analog at mic-level (–23 dBV).
The lightweight, sturdy metal housing accepts a quick-change, click-on Battery Housing for totally self-contained operation, if desired. The Control Pack also operates on external 12-14V DC – from an Anton/Bauer or similar-type battery source, or from an AC adapter – via an industry-standard 4-pin XLR-type connection.
Control features on the AT895CP are:
- Three-position Mode (pickup pattern) switch which provides Full-field Adaptive, Planar-adaptive and Line + Gradient settings.
- Audio filter switch with Flat, High-pass and Band-pass settings.
- Monitor headphone jack with volume control.
- LCD battery condition indicator.
- Power switch with LED indicator.
For more information, download the AT895 Manual
Two System Configurations
The AT895 is available as the AT895/RK "Remote Kit" for field use, and as the AT895/MK "Mount Kit" for studio and fixed-install applications.
AT895/RK Remote Kit includes:
- AT895MIC Adaptive-array Microphone
- AT895CP Control Pack with attached belt clip
- AT895BH Click-on Battery Housing
- AT895PG Pistol-grip shock mount
- AT895Z Zeppelin-type windscreen
- AT895C-10 Special 6-conductor shielded Cable, 10' long
- AT895CC Carrying Case
AT895/MK Mount Kit includes:
- AT895MIC Adaptive-array Microphone
- AT895CP Control Pack
- AT895SC Shock-mount Stand Clamp with 5/8"-27 threaded stud
- AT895PS1 Multi-input AC Power Supply with "120V" IEC detachable power cord
- AT895C-25 Special 6-conductor shielded Cable, 25' long
All components and accessories are interchangeable and available separately to augment systems or to use as "field spares."
||(5) Fixed-charge back plate, permanently polarized condenser|
|PICKUP PATTERN MODES
Line + Gradient
|LOW FREQUENCY ROLL-OFF
||80 Hz, 18 dB/octave|
||300-5,500 Hz, 6 dB/octave|
|OPEN CIRCUIT SENSITIVITY
||-23 dBV (70 mV) at 1 Pa, 1 kHz|
|MAXIMUM INPUT SOUND LEVEL
||117 dB SPL, 1 kHz at 1% T.H.D.|
|DYNAMIC RANGE (typical)
||93 dB, 1 kHz at Max SPL|
||70 dB, 1 kHz at 1 Pa|
||External -- 9-15V DC, 250 mA typical|
||AT895BH -- Three 9V (NEDA type 1604), not included
Typical Life: Alkaline, 4-6 hours; Lithium, 10-12 hours
||AT895 Microphone (less cable): 16.7 oz (473 g)
AT895CP Control Pack: 10.0 oz (284 g)
AT895BH Battery Holder (with typical batteries): 7.6 oz (215 g))
AT895PG Pistol Grip: 10.0 oz (284 g)
AT895Z Zeppelin Windscreen: 5.0 oz (142 g)
14.00" (355.6 mm) long,
2.75" (69.9 mm) max. diameter,
1.18" (30.0 mm) handle diameter
AT895CP Control Pack:
4.16" (105.7 mm) long,
3.34" (84.8 mm) wide,
0.98" (24.9 mm) high
AT895BH Battery Holder:
4.13" (104.9 mm) long,
3.28" (83.3 mm) wide,
1.27" (32.3 mm) high
||Control Pack: Integral 3-pin XLRM-type|
||6 conductor shielded cable with XLR7F-type connectors
AT895/RK: 10' (3.0 m) long
AT895/MK: 25' (7.6 m) long