AT815ST Stereo Shotgun Microphone (DISCONTINUED)
The AT815ST has been updated. Click here for more information on the newest model.At 14.96" (380.0 mm) in length, the AT815ST is engineered for long-distance pickup in broadcasting and film/TV production. The AT815ST features internal matrixing innovations that allow for professional quality stereo audio with or without an external matrix. Its compact, lightweight design is perfect for camera-mount use. The AT815ST also features switchable low-frequency roll-off and independent line-cardioid and figure-of-eight condenser elements.
- Designed for broadcasters, videographers and sound recordists
- Compact, lightweight design is perfect for camera-mount use
- Independent Line-cardioid and Figure-of-eight condenser elements
- Switchable low-frequency roll-off
- Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes
- Includes a 24" (0.61 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors)
| SPECIFICATIONS | |
|---|---|
| ELEMENTS | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERNS | Line-cardioid,
Figure-of-eight |
| FREQUENCY RESPONSE | 30-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | Mid: -30 dB (31.6 mV) re 1V at 1 Pa;
Side: -34 dB (19.9 mV) re 1V at 1 Pa; LR Stereo: -36 dB (15.8 mV) re 1V at 1 Pa |
| IMPEDANCE | 200 ohms |
| MAXIMUM INPUT SOUND LEVEL | Mid: 123 dB SPL, 1 kHz at 1% T.H.D.;
Side: 127 dB SPL, 1 kHz at 1% T.H.D.; LR Stereo: 126 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | Mid: 101 dB, 1 kHz at Max SPL;
Side: 101 dB, 1 kHz at Max SPL; LR Stereo: 102 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | Mid: 72 dB SPL, 1 kHz at 1 Pa;
Side: 68 dB SPL, 1 kHz at 1 Pa; LR Stereo: 70 dB SPL, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 4 mA typical at 48V, each channel |
| SWITCHES | M-S, LR Stereo-Wide (LR-W);
LR Stereo-Narrow (LR-N); Flat, roll-off |
| WEIGHT | 5.0 oz (142 g) |
| DIMENSIONS | 14.96" (380.0 mm) long,
0.83" (21.0 mm) diameter |
| OUTPUT CONNECTOR | Integral XLR5M-type |
| CABLE | Dual 24" (0.61 m) shielded two-conductor, terminated in two XLR3M-type connectors |
| ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; AT8135 windscreen; protective carrying case |
| AUDIO-TECHNICA CASE STYLE | SG3 |
| SPECIFICATION GRAPHS | ||
|---|---|---|
| Click on the chart to view the larger image | ||
|
| |
|
| |
|
| |
|
| |
|
| |
Conditions
AT815ST : Stereo Shotgun Microphone
