|ELEMENT||Fixed-charge back plate, permanently polarized condenser|
|FREQUENCY RESPONSE||20-20,000 Hz|
|OPEN CIRCUIT SENSITIVITY||–34 dB (19.9 mV) re 1V at 1 Pa|
|MAXIMUM INPUT SOUND LEVEL||114 dB SPL, 1 kHz at 3% T.H.D.|
|SIGNAL-TO-NOISE RATIO||68 dB, 1 kHz at 1 Pa|
|CURRENT CONSUMPTION||0.1 mA typical at 5V (wireless only)|
|VOLTAGE RANGE||2.5-11V (wireless only)|
|WEIGHT (MICROPHONE)||Microphone, boom & earpiece: 2.0 g (0.07 oz)|
|DIMENSIONS||Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
Boom: 26.4 mm (1.04") long, 1.07 mm (0.04") diameter
|OUTPUT CONNECTOR (POWER MODULE)||Integral 3-pin XLRM-type|
|CABLE||1.4 m (55"), unterminated|
|ACCESSORIES FURNISHED||BP893c: AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; carrying case
BP893c-TH: AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; carrying case
|AUDIO-TECHNICA CASE STYLE||M31|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:will this product work with model: AEW-T1000? I am looking at replacing the pastors headset as the one we have is worn out.
A:No, you may use the BP893cW-TH.
Q:Will the BP893 MicroEarset Microphone work effectively with the ATW T210 uhf transmitter
A:Thank you for your inquiry. The BP893cW and the BP893cW-TH are both designed to work with your transmitter with no modifications.
Q:Compatibility with AKG PT450
A:Thank your for your inquiry. We have not tested, therefore we do not support a version of this microphone for AKG systems.
Q:What transmitter works well with the BP893c?
A:Thank you for your inquiry. The BP893C is unterminated (bare wire with no connector). This is provided for those how need a special wiring for a partuclar application.
Q:How to wire a BP893C-TH microphone to a TOA WM370 transmitter.
A:Thank you for your inquiry. If the Toa is a 2 wire configuration this probably will not work, or at least not well. The BP892C wires are: