AT841Rx (DISCONTINUED)

Omnidirectional Condenser Boundary Microphone

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Features
  • Specifications

  • Features


    • Designed for surface-mount applications requiring high-quality sound pickup

    • Heavy die-cast case and rubber bottom pad minimize coupling of surface vibration to the microphone

    • Operates on phantom power only

    • Low-profile design for minimum visibility

  • Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNOmnidirectional
    FREQUENCY RESPONSE30-20,000 Hz
    LOW FREQUENCY ROLL-OFF150 Hz, 18 dB/octave
    OPEN CIRCUIT SENSITIVITY-42 dB (7.9 mV) re 1 V at 1 Pa
    IMPEDANCE200 ohms
    MAXIMUM INPUT SOUND LEVEL133 dB SPL, 1 kHz at 1% T.H.D.
    DYNAMIC RANGE (typical)104 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO65 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS9-52V DC, 2 mA typical phantom only
    SWITCHFlat, Roll-off
    WEIGHT (MICROPHONE)2.8 oz (80 g)
    WEIGHT (POWER MODULE)2.1 oz (60 g)
    DIMENSIONS (MICROPHONE)2.56" (65.0 mm) diameter,
    0.59" (15.0 mm) height
    DIMENSIONS (POWER MODULE)3.58" (91.0 mm) long,
    0.83" (21.0 mm) diameter
    OUTPUT CONNECTOR (POWER MODULE)Integral 3-pin XLRM-type
    CABLE25' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded; free end attached to screw terminals in power module
    ACCESSORIES FURNISHEDAT8533x power module; soft protective pouch
    AUDIO-TECHNICA CASE STYLEP1



    Conditions