|ELEMENT||Fixed-charge back plate, permanently polarized condenser|
|FREQUENCY RESPONSE||30-20,000 Hz|
|LOW FREQUENCY ROLL-OFF||80 Hz, 18 dB/octave|
|OPEN CIRCUIT SENSITIVITY||–37 dB (14.1 mV) re 1V at 1 Pa|
|MAXIMUM INPUT SOUND LEVEL||135 dB SPL, 1 kHz at 1% T.H.D.|
|DYNAMIC RANGE (typical)||108 dB, 1 kHz at Max SPL|
|SIGNAL-TO-NOISE RATIO||67 dB, 1 kHz at 1 Pa|
|PHANTOM POWER REQUIREMENTS||11-52V DC, 2 mA typical|
|WEIGHT (MICROPHONE)||1.3 g (0.05 oz)|
|WEIGHT (POWER MODULE)||81 g (2.9 oz)|
|DIMENSIONS (MICROPHONE)||15.8 mm (0.62") long,
8.3 mm (0.33") wide,
5.0 mm (0.19") thick
|DIMENSIONS (POWER MODULE)||92.9 mm (3.66") long,
18.9 mm (0.74") diameter
|OUTPUT CONNECTOR||Integral 3-pin XLRM-type|
|CABLE||7.6 m (25') long (permanently attached to microphone), 2.5 mm (0.10") diameter, 2-conductor, shielded cable with TA3F-type output connector|
|ACCESSORIES FURNISHED||AT8538 power module; clothing clip; windscreens|
|AUDIO-TECHNICA CASE STYLE||M7|
|Click on the chart to view the larger image|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Will this work with audio-technica Model: ATW-T210aD? If not which model of lavalier microphone would, and which one would you recommend?
A:You may use the MT830cW microphone with an Audio-Technica UniPak transmitter, such as the ATW-T210aD.
Q:Will this model or any comparable mic function with a receiver like the ones we use in the 2120 systems?
A:You may use any wireless microphone that ends in the code "cW" such as the MT830cW.
Q:Is the mic clip supposed to be loose and spin on its axis, allowing mic to shift when wearer moves
A:In most applications, the audio person attaching the mic uses a technique called the "broadcast loop" to secure the cable behind the mic to help keep it from moving and minimizing the transmission of mechanical noise up the cable.
A:Yes. This is primarily due to the fact that the MT830 is an Omnidirectional Microphone.
Q:MT830c-TH with AT831b power module
A:Thank you for your inquiry. Each microphone is designed for use with a particular module. The usual power module used with the MT830 is the AT8538. Using the AT8531 the microphone will work, but I'm quite sure it will spec differently. Also, please note that I'm not sure if the MT830 will work with the AT8531 when using the battery and not phantom power.
Q:Is MT830cW-TH compatible with AT831b power module?
A:Thank you for your inquiry. The MT830R has a TA3F connector, but is not sold without the power module (AT8538). The MT830cW has a 4 pin Hirose connector and is made to connect to a wireless system. We do not offer a version with a TA3F connector or adapter. The MT830c has no connector and the customer can wire it with a TA3F connector.