Dealer Locator

ES995 Dual-element Cardioid Condenser Rigid-pipe Microphone - (DISCONTINUED)

Two microphones in one—perfect for applications requiring separate miking for PA and broadcast. The ES995 offers excellent sonic character, simple operation and streamlined appearance. One element is typically used to provide sound reinforcement while the other feeds clean audio to a broadcast network, media pool or logging recorder with no electrical interaction between the elements. The two elements can also feed audio to two separate installed systems in a church or school. The circuit grounds for each channel are completely isolated, greatly reducing the potential for hum. Each element is individually shock-mounted. Robust table-mounted microphone is ideal for courtrooms, boardrooms, government chambers, schools and churches. Rigid-pipe design has ball-in-socket mounted to heavy, portable tabletop base. Integral dual power module; requires 11-52V DC phantom power. Optically coupled, lighted remote mute switch has three modes (push-to-mute, toggle, and push-to-talk). Interchangeable elements are available for omnidirectional and hypercardioid patterns. 19.51” long.

Designed for quality sound reinforcement in demanding situations, especially those requiring separate miking for PA and broadcast

Dual-element configuration features completely isolated circuit grounds for each channel, greatly reducing the potential for hum

Fixed low-frequency roll-off (120 Hz, 12 dB/octave) and 15 dB pad

Dual integral windscreens ensure ultimate security against wind noise and plosives

Integral mute switch on base with three modes (push-to-mute, toggle, push-to-talk) and LED indicator light

Sturdy metal desk stand base houses dual power module with 6-pin XLRM-type output connector

Includes 30' splitter cable (6-pin XLRF-type to two 3-pin XLRM-type) for use with in-house and remote feeds

Small-diameter rigid-pipe design with pivoting ball-in-socket

SPECIFICATIONS
ELEMENTS	Two fixed-charge back plate, permanently polarized condensers
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	90-15,000 Hz
LOW FREQUENCY ROLL-OFF	Fixed 120 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	-41 dB (8.9 mV) re 1V at 1 Pa
IMPEDANCE	250 ohms
MAXIMUM INPUT SOUND LEVEL	138 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	109 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 3 mA typical
SWITCHES	(on circuit board) SW1: Normal/-15 dB SW2: Mute/Toggle/Talk SW3: Off/On
WEIGHT	3.31 lb (1.5 kg)
DIMENSIONS	19.51" (495.6 mm) long, 1.51" (38.4 mm) maximum head diameter
OUTPUT CONNECTOR	Integral 6-pin XLRM-type
CABLE	30' (9.1 m) 6-conductor shielded "Y" cable - 6-pin XLRF to two 3-pin XLRM
OPTIONAL INTERCHANGEABLE ELEMENTS	ESE-H hypercardioid (100º); ESE-0 omnidirectional (360º)
ACCESSORY FURNISHED	Switch cover label