AT3035 (DISCONTINUED)

Cardioid Condenser Microphone

MSRP* US$349.00

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Downloads

  • Overview


    Designed for critical home/project/professional studio applications and live performance, this 30 Series large-diaphragm side-address cardioid condenser delivers exceptional detail and low noise. With its extended low-frequency response, the AT3035 produces rich, full sound reproduction and handles extremely high sound pressure levels with ease. Tailored for a smooth, natural sound, this mic is a perfect complement for digital recording equipment. Along with its rugged construction and high-performance specifications, the AT3035 provides an exceptional level of consistency from model to model.
  • Features


    • Custom-engineered large diaphragm for exceptional detail and low noise

    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

    • High max SPL, wide dynamic range and optimized output level provide unmatched versatility

    • Low self-noise (12 dB SPL) perfectly suited for today's most sophisticated digital recording equipment

    • Extended low-frequency response for rich, full sound

    • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards

    • Custom shock mount provides superior isolation

    • Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad

  • Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE20-20,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY-32 dB (25.1 mV) re 1V at 1 Pa
    IMPEDANCE250 ohms
    MAXIMUM INPUT SOUND LEVEL148 dB SPL, 1 kHz at 1% T.H.D.;
    158 dB SPL, with 10 dB pad (nominal)
    NOISE12 dB SPL
    DYNAMIC RANGE (typical)136 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO82 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS11-52V DC, 3 mA typical
    SWITCHESFlat, roll-off;
    10 dB pad (nominal)
    WEIGHT13.8 oz (390 g)
    DIMENSIONS6.69" (170.0 mm) long,
    2.05" (52.0 mm) maximum body diameter
    OUTPUT CONNECTORIntegral 3-pin XLRM-type
    ACCESSORIES FURNISHEDAT8458 shock mount for 5/8"-27 threaded stands; soft protective pouch
    AUDIO-TECHNICA CASE STYLER5
    Click on the chart to view the larger image
    POLAR PATTERN
    POLAR PATTERN
    FREQUENCY RESPONSE
    FREQUENCY RESPONSE



    Conditions
  • Downloads

    AT3035 Specification Sheet (pdf 73.53 KB)
    Optional Windscreens / Mounts