ES905/C Cardioid Condenser Rigid-Pipe Microphone - (DISCONTINUED)
The ES905/C is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The microphone’s low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle; it is also available in hypercardioid (/H) and MicroLine® (/ML) models. Power module included.- Low-profile element provides uniform hypercardioid polar pattern with 100º acceptance angle
- Rigid-pipe design with ball-in-socket base permits flexible positioning
- Sturdy metal base mounts to table, desk or podium with included hardware
- Available interchangeable elements permit angle of acceptance from 90º to 360º
| SPECIFICATIONS | |
|---|---|
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Cardioid |
| FREQUENCY RESPONSE | 30-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | -40 dB (10.0 mV) re 1V at 1 Pa |
| IMPEDANCE | 250 ohms |
| MAXIMUM INPUT SOUND LEVEL | 138 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | 109 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 65 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 4 mA typical |
| SWITCH | Flat, roll-off |
| WEIGHT (MICROPHONE) | 10.0 oz (284 g) |
| WEIGHT (POWER MODULE) | 2.0 oz (56 g) |
| DIMENSIONS (MICROPHONE) | 16.78" (426.2 mm) long,
0.33" (8.4 mm) head diameter |
| DIMENSIONS (POWER MODULE) | 3.86" (98.0 mm) long,
0.74" (18.9 mm) diameter |
| OUTPUT CONNECTOR (POWER MODULE) | Integral 3-pin XLRM-type |
| CABLE | 9.5' (2.9 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, low noise, shielded; free end attached to screw terminals in power module |
| OPTIONAL INTERCHANGEABLE ELEMENTS | ESE-H Hypercardioid (100°)
ESE-ML MicroLine® (90°) ESE-O Omnidirectional (360°) |
| ACCESSORIES FURNISHED | AT8536 power module; AT8109 foam windscreen; three #8 x 1" black oxide wood screws for microphone mount |
| AUDIO-TECHNICA CASE STYLE | M26 |
| SPECIFICATION GRAPHS | ||
|---|---|---|
| Click on the chart to view the larger image | ||
|
| |
|
| |
Conditions
ES905/C : Cardioid Condenser Rigid-Pipe Microphone -
