|ELEMENT||Fixed-charge back plate, permanently polarized condenser|
|FREQUENCY RESPONSE||20-20,000 Hz|
|LOW FREQUENCY ROLL-OFF||80 Hz, 18 dB/octave (wired only)|
|OPEN CIRCUIT SENSITIVITY||–49 dB (3.5 mV) re 1V at 1 Pa|
|IMPEDANCE||250 ohms (wired only)|
|MAXIMUM INPUT SOUND LEVEL||135 dB SPL, 1 kHz at 3% T.H.D.|
|DYNAMIC RANGE (typical)||104 dB, 1 kHz at Max SPL (wired only)|
|SIGNAL-TO-NOISE RATIO||63 dB, 1 kHz at 1 Pa|
|PHANTOM POWER REQUIREMENTS||11-52V DC, 2 mA typical (wired only)|
|SWITCH||Flat, roll-off (wired only)|
|CURRENT CONSUMPTION||0.1 mA typical at 5V (wireless only)|
|VOLTAGE RANGE||2.5-11V (wireless only)|
|WEIGHT (MICROPHONE)||Microphone, boom & earpiece: 2.0 g (0.07 oz)|
|WEIGHT (POWER MODULE)||85 g (3.0 oz)
|DIMENSIONS||Microphone: 6.5 mm (0.26") long, 2.8 mm (0.11") diameter
Boom: 107.4 mm (4.23") long, 1.09 mm (0.04") diameter
|DIMENSIONS (POWER MODULE)||97.6 mm (3.84") long, 18.9 mm (0.74") diameter
|OUTPUT CONNECTOR (POWER MODULE)||Integral 3-pin XLRM-type|
|CABLE||1.4 m (55") long (permanently attached to microphone), 1.6 mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)|
|ACCESSORIES FURNISHED||BP894: AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8163 windscreens; moisture guard; belt clip (wired only); carrying case
BP894-TH: AT8539 power module (wired only); AT8464-TH dual-ear microphone mount; AT8440 cable clip; two AT8163-TH windscreens; moisture guard; belt clip (wired only); carrying case
|Click on the chart to view the larger image|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Is the BP 894 compatible with an ATW-T201 transmitter?
A:No it is not, the BP894cW-TH is. We offer the BP894 in both wired and wireless versions. The wireless version is the BP894cW-TH. Any of our microphones or cables whose model number contains the letters "cW" are compatible with any of our wireless systems that use the UniPak model bodypack transmitter. The ATW-T201 is a UniPak model. The "cW" refers to the connector type and the wiring scheme. All "cW' model mics and cables will have the 4-pin female Hirose connector on them.
A:Any microphone with a “cW” in the title will work with your 4000 Series. The 4000 Series bodypack transmitters used a 4-Pin HRS connection. The “cW” means the microphone has a 4-Pin HRS.