Resources
BP893 & BP893-TH Submittal Sheet
pdf 426.13 KBBP893 & BP893-TH Specification Sheet
pdf 515.31 KB
Dealer Locator
BP893c MicroEarset Omnidirectional Condenser Headworn Microphone
BP893 Omnidirectional Condenser Headworn Microphone, less power module. 1.4 m (55") permanently attached miniature cable, unterminated. Includes AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. See BP893 for more details.- Outstanding clarity and intelligibility
- Lightweight, ergonomic design
- Extremely unobtrusive, 1-inch flexible boom
- Secure over-the-ear placement
- Extended frequency response for natural vocal reproduction
- Available in black and beige, wired and wireless models; See BP893 for more details
| SPECIFICATIONS | |
|---|---|
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Omnidirectional |
| FREQUENCY RESPONSE | 20-20,000 Hz |
| OPEN CIRCUIT SENSITIVITY | –34 dB (19.9 mV) re 1V at 1 Pa |
| MAXIMUM INPUT SOUND LEVEL | 114 dB SPL, 1 kHz at 3% T.H.D. |
| SIGNAL-TO-NOISE RATIO | 68 dB, 1 kHz at 1 Pa |
| CURRENT CONSUMPTION | 0.1 mA typical at 5V (wireless only) |
| VOLTAGE RANGE | 2.5-11V (wireless only) |
| WEIGHT (MICROPHONE) | Microphone, boom & earpiece: 2.0 g (0.07 oz) |
| DIMENSIONS | Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
Boom: 26.4 mm (1.04") long, 1.07 mm (0.04") diameter |
| OUTPUT CONNECTOR (POWER MODULE) | Integral 3-pin XLRM-type |
| CABLE | 1.4 m (55"), unterminated |
| ACCESSORIES FURNISHED | BP893c: AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; carrying case
BP893c-TH: AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; carrying case |
| AUDIO-TECHNICA CASE STYLE | M31 |
| WARRANTIES | ||
|---|---|---|
Conditions
(1 Question : 1 Answer)
Product Q&A
Ask your questions. Share your answers.
 All
 All
I love the design of this model, but it is element is just too far from the mouth to get good gain before feedback issues. Any workarounds?
1 year, 3 months ago
Answers
Answer:Â
Thank you for your inquiry. First, you need to stay away from the loudspeakers. Secondly, if you are using this with a wireless system, decrease the input gain on the transmitter. This will make the mic less sensitive and can help keep sound from re-entering the microphone. You will need to compensate at the mixing console.Age:Â 45-54
Experience:Â Pro
1 year, 3 months ago
by
Stow, OH
Additional information about AudioSolutionsManager could not be loaded.
1 of 1
1 of 1
BP893c MicroEarset : Omnidirectional Condenser Headworn Microphone
BP893c-TH MicroEarset Omnidirectional Condenser Headworn Microphone
BP893c & BP893c-TH MicroEarset Omnidirectional Condenser Headworn Microphone
BP893c & BP893c-TH MicroEarset Omnidirectional Condenser Headworn Microphone
