PRO 35ax (DISCONTINUED)

Cardioid Condenser Clip-on Instrument Microphone

MSRP* US$239.00

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Downloads

  • Overview


    The PRO 35ax has been discontinued. The PRO 35 is a similar model, click here for more information.

    Designed for sax, toms, brass and percussion, the PRO 35ax excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.
  • Features

    • UniMount® clip permits accurate positioning, provides shock resistance and protects element

    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

    • Extended frequency response captures subtle nuances of the performance

    • 6' (1.8 m) cable permanently attached between microphone and power module



  • Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE50-15,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY-45 dB (5.6 mV) re 1V at 1 Pa
    IMPEDANCE250 ohms
    MAXIMUM INPUT SOUND LEVEL145 dB SPL, 1 kHz at 1% T.H.D.
    DYNAMIC RANGE (typical)115 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO64 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS11-52V DC, 4 mA typical
    SWITCHFlat, roll-off
    WEIGHT (MICROPHONE)0.3 oz (8 g)
    WEIGHT (POWER MODULE)2.0 oz (56 g)
    DIMENSIONS (MICROPHONE)0.98" (25.0 mm) long,
    0.40" (10.2 mm) diameter
    DIMENSIONS (POWER MODULE)3.86" (98.0 mm) long,
    0.74" (18.9 mm) diameter
    OUTPUT CONNECTOR (POWER MODULE)Integral 3-pin XLRM-type
    CABLEIntegral 6' (1.8 m) permanently attached between microphone and power module
    ACCESSORIES FURNISHEDAT8418 UniMount® microphone instrument mount; AT8536 power module; soft protective pouch
    AUDIO-TECHNICA CASE STYLEM12
    Click on the chart to view the larger image
    POLAR PATTERN
    POLAR PATTERN
    FREQUENCY RESPONSE
    FREQUENCY RESPONSE



    Conditions
  • Downloads

    PRO 35ax Specification Sheet (pdf 94.71 KB)
    Optional Windscreens / Mounts