ATM35 Cardioid Condenser Clip-on Instrument Microphone (DISCONTINUED)
- Clips to brass, reeds, piano, acoustic bass, snare and toms
- Crisp, clear, well-balanced response, even at high SPLs
- Interchangeable elements available for hypercardioid and subcardioid polar patterns
- UniMount® clip permits accurate positioning while protecting element
- Operates on battery or phantom power
- Also available as:
ATM35cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
| SPECIFICATIONS | |
|---|---|
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Cardioid |
| FREQUENCY RESPONSE | 30-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 150 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | -45 dB (5.6 mV) re 1V at 1 Pa |
| IMPEDANCE | 200 ohms |
| MAXIMUM INPUT SOUND LEVEL | 145 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | 118 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 67 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 2 mA typical |
| BATTERY TYPE | 9V |
| BATTERY CURRENT / LIFE | 1 mA / 1000 hours typical |
| SWITCH | On-flat, on-roll-off (phantom)
Off, on-flat, on-roll-off (battery) |
| WEIGHT (MICROPHONE) | 0.3 oz (8.5 g) |
| WEIGHT (POWER MODULE) | 5.4 oz (153 g) |
| DIMENSIONS (MICROPHONE) | 1.39" (35.2 mm) long,
0.47" (12.0 mm) diameter |
| DIMENSIONS (POWER MODULE) | 3.78" (96.0 mm) H x
2.48" (63.0 mm) W x 0.87" (22.0 mm) D |
| OUTPUT CONNECTOR (POWER MODULE) | Integral 3-pin XLRM-type |
| CABLE | 25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module |
| ACCESSORIES FURNISHED | AT8418 UniMount® instrument mount; AT8532 power module; soft protective pouch |
| AUDIO-TECHNICA CASE STYLE | M12 |
| SPECIFICATION GRAPHS | ||
|---|---|---|
| Click on the chart to view the larger image | ||
|
| |
|
| |
Conditions
ATM35 : Cardioid Condenser Clip-on Instrument Microphone
