ATM350D

Cardioid Condenser Instrument Microphone with Drum Mounting System (5" Gooseneck)

MSRP* US$349.00
Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • drum microphone,microphone for drums
  • drum mic,mic for drums
  • Instrument Mic,instrument mic system
  • drum mount
  • drum microphone accessories


  • Overview
  • Features
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview


    Designed for use with drums, the ATM350D UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491D drum mount and strong, flexible AT8490 5" gooseneck, the mic can be securely fastened to the drum and positioned to stay where you want it. The drum mount’s unique spring-loaded mechanism clamps it tightly to a drum lug (without hindering your ability to adjust the lug) and provides excellent shock resistance for the mic; the gooseneck’s rigidity ensures that it won’t flop around no matter how aggressively you play.

    The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.

    Check out other ATM350a Microphone Systems!
  • Features

    • Low-profile mic design for minimum visibility

    • Crisp, clear, well-balanced microphone response, even at high SPLs

    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

    • UniMount® drum mount with unique spring-loaded mechanism attaches securely to a drum lug, and provides excellent shock resistance for the microphone

    • Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play

    • In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise

    • Interchangeable elements available for hypercardioid and omnidirectional polar patterns

    • Included violin mount with hook-and-loop fastener provides an additional mounting option
  • Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE40 – 20,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY–49 dB (3.5 mV) re 1V at 1 Pa
    IMPEDANCE200 ohms
    MAXIMUM INPUT SOUND LEVEL159 dB SPL, 1 kHz at 1% T.H.D.
    DYNAMIC RANGE (typical)130 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO65 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS11– 52V DC, 3.5 mA typical
    SWITCHFlat, roll-off
    WEIGHT (MICROPHONE)14.5 g (0.5 oz)
    WEIGHT (POWER MODULE)90 g (3.2 oz)
    DIMENSIONS (MICROPHONE)37.8 mm (1.49'') long,
    12.2 mm (0.48'') maximum body diameter
    DIMENSIONS (POWER MODULE)92 mm (3.62") long,
    18.9 mm (0.74") diameter
    OUTPUT CONNECTOR (POWER MODULE)Integral 3-pin XLRM-type
    CABLE4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
    OPTIONAL INTERCHANGEABLE ELEMENTSUE-H hypercardioid (100°);
    UE-O omnidirectional (360°)
    ACCESSORIES FURNISHEDATM350a cardioid condenser microphone; AT8543 power module; AT8491D UniMount® drum mount; AT8490 UniMount® 5" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case
    AUDIO-TECHNICA CASE STYLEM36



    Conditions
  • Downloads

    ATM350a Microphone Systems Brochure (pdf 1.81 M)
    Optional Windscreens / Mounts
  • Reviews

  • Q & A