ATM350UL

Cardioid Condenser Instrument Microphone with Universal Clip-on Mounting System (9" Gooseneck)

MSRP* US$309.00
Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • Instrument Mic,instrument mic system
  • drum mic,microphone for drums
  • Instrument Microphone
  • Accessories for instrument microphones


  • Overview
  • Features
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview


    Designed for use with brass, saxophone and other instruments, the ATM350UL UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491U universal clip-on mount and strong, flexible AT8490L 9" gooseneck, the mic can be clipped securely to the bell of your instrument and positioned to stay where you want it – the gooseneck won’t flop around no matter how aggressively you move the instrument as you play.

    The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.

    Check out other ATM350a Microphone Systems!
  • Features

    • Low-profile mic design for minimum visibility

    • Crisp, clear, well-balanced microphone response, even at high SPLs

    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

    • UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone

    • Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play

    • In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise

    • Interchangeable elements available for hypercardioid and omnidirectional polar patterns

    • Included violin mount with hook-and-loop fastener provides an additional mounting option
  • Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE40 – 20,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY–49 dB (3.5 mV) re 1V at 1 Pa
    IMPEDANCE200 ohms
    MAXIMUM INPUT SOUND LEVEL159 dB SPL, 1 kHz at 1% T.H.D.
    DYNAMIC RANGE (typical)130 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO65 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS11– 52V DC, 3.5 mA typical
    SWITCHFlat, roll-off
    WEIGHT (MICROPHONE)14.5 g (0.5 oz)
    WEIGHT (POWER MODULE)90 g (3.2 oz)
    DIMENSIONS (MICROPHONE)37.8 mm (1.49'') long,
    12.2 mm (0.48'') maximum body diameter
    DIMENSIONS (POWER MODULE)92 mm (3.62") long,
    18.9 mm (0.74") diameter
    OUTPUT CONNECTOR (POWER MODULE)Integral 3-pin XLRM-type
    CABLE4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
    OPTIONAL INTERCHANGEABLE ELEMENTSUE-H hypercardioid (100°);
    UE-O omnidirectional (360°)
    ACCESSORIES FURNISHEDATM350a cardioid condenser microphone; AT8543 power module; AT8491U UniMount® universal clip-on mount; AT8490L UniMount® 9" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case
    AUDIO-TECHNICA CASE STYLEM36



    Conditions
  • Downloads

    ATM350a Microphone Systems Brochure (pdf 1.81 M)
    Optional Windscreens / Mounts
  • Reviews

  • Q & A