AT4040SM

Cardioid Condenser Microphone-

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications

  • Overview


    The AT4040SM side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040SM offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040SMís low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. Supplied with AT8449 shockmount. Also available with the AT8430 stand clamp, AT4040SC.
  • Features


    • Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics

    • Externally polarized (DC bias) true condenser design

    • Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility

    • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

    • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity

    • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections

    • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards

    • Custom shock mount provides superior isolation

    • Switchable 80 Hz hi-pass filter and 10 dB pad

  • Specifications

    ELEMENTExternally-polarized (DC bias) condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE20-20,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY-32 dB (25.1 mV) re 1V at 1 Pa
    IMPEDANCE100 ohms
    MAXIMUM INPUT SOUND LEVEL145 dB SPL, 1 kHz at 1% T.H.D.;
    155 dB SPL, with 10 dB pad (nominal)
    NOISE12 dB SPL
    DYNAMIC RANGE (typical)133 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO82 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS48V DC, 4.2 mA typical
    SWITCHESFlat, roll-off;
    10 dB pad (nominal)
    WEIGHT12.7 oz (360 g)
    DIMENSIONS6.69" (170.0 mm) long,
    2.10" (53.4 mm) maximum body diameter
    OUTPUT CONNECTORIntegral 3-pin XLRM-type
    ACCESSORIES FURNISHEDAT8449 shock mount for 5/8"-27 threaded stands; protective carrying case
    AUDIO-TECHNICA CASE STYLER1
    Click on the chart to view the larger image
    POLAR PATTERN
    POLAR PATTERN
    FREQUENCY RESPONSE
    FREQUENCY RESPONSE



    Conditions