Resources

AT892 MicroSet (Wired Models) Specification Sheet
pdf 110.22 KB

AT892 MicroSet (Wireless Terminations) Specification Sheet
pdf 77.05 KB

Dealer Locator

AT892 MicroSet® Omnidirectional Condenser Headworn Microphone (DISCONTINUED)

ATTENTION! THE AT892 HAS BEEN REPLACED BY THE BP892.
CLICK HERE FOR DETAILS ON THE BP892.

Introducing a giant stride in the technology of inconspicuous sound. With a capsule diameter of just 2.5 mm, the new MicroSet provides the ultimate in low-profile, high-performance audio. This innovative omnidirectional condenser headworn mic offers an ergonomic under-ear design: its flexible, lightweight contoured loop hooks behind either ear for an ultra-secure, comfortable fit with or without glasses.

The new quality/wearability standard for micro headset technology

Capsule diameter of just 2.5 mm for the ultimate in low-profile, high-performance audio

Inconspicuous, lightweight headset is ideal for applications requiring minimum visibility

Ergonomic under-ear design—flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses

Industry-standard sound quality—extremely intelligible natural audio for stage and television talent, lecturers and houses of worship

Rugged construction designed to meet the challenges of day-to-day use in production and theater settings

Also available as:
AT892-TH – same as AT892, but in "theater" color (beige)
AT892-CO – same as AT892, but in cocoa color
AT892c – less power module; 55" (1.4 m) cable, unterminated
AT892c-TH – same as AT892c, but in "theater" color (beige)
AT892c-CO – same as AT892c, but cocoa color
AT892cL4 – less power module; 55" (1.4 m) cable terminated for Sennheiser wireless systems using Lemo connector
AT892cL4-TH – same as AT892cL4, but in "theater" color (beige)
AT892cL4-CO – same as AT892cL4, but cocoa color
AT892cLM3 – less power module; 55" (1.4 m) cable terminated for Sennheiser wireless systems using locking 3.5 mm connector
AT892cLM3-TH – same as AT892cLM3, but in "theater" color (beige)
AT892cLM3-CO – same as AT892cLM3, but cocoa color
AT892cT4 – less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems
AT892cT4-TH – same as AT892cT4, but in "theater" color (beige)
AT892cT4-CO – same as AT892cT4, but cocoa color
AT892cT5 – less power module; 55" (1.4 m) cable terminated with TA5F connector for Lectrosonics wireless systems
AT892cT5-TH – same as AT892cT5, but in "theater" color (beige)
AT892cT5-CO – same as AT892cT5, but cocoa color
AT892cW – less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
AT892cW-TH – same as AT892cW, but in "theater" color (beige)
AT892cW-CO – same as AT892cW, but cocoa color

SPECIFICATIONS
ELEMENT	Condenser
POLAR PATTERN	Omnidirectional
FREQUENCY RESPONSE	20-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY	–44 dB (6.3 mV) re 1V at 1 Pa
IMPEDANCE	250 ohms
MAXIMUM INPUT SOUND LEVEL	122 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	88 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	60 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 2 mA typical
WEIGHT (MICROPHONE)	Microphone, Boom & Earpiece: 2.4 g (0.08 oz)
WEIGHT (POWER MODULE)	2.4 g (0.08 oz)
DIMENSIONS	Microphone: 8.1 mm (0.32") long, 2.7 mm (0.11") diameter Boom: 98.4 mm (3.87") long, 1.07 mm (0.042") boom diameter
DIMENSIONS (POWER MODULE)	97.6 mm (3.84") long, 18.9 mm (0.74") diameter
OUTPUT CONNECTOR (POWER MODULE)	Integral 3-pin XLRM-type
CABLE	1.4 m (55") long (permanently attached to microphone) 1.6 mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector
ACCESSORIES FURNISHED	AT8539 power module; two AT8157 windscreens; two AT8156 element covers; AT8440 clothing clip; moisture guard; belt clip; carrying case
AUDIO-TECHNICA CASE STYLE	M31