Dealer Locator

ES961 Unidirectional Condenser Boundary Microphone (black) - (DISCONTINUED)

The ES961 is designed for surface-mount applications needing unidirectional sound reinforcement with high signal-to-noise ratio and elimination of phase distortion due to reflections. It features a recessed switch that permits low-end roll-off for reduction of low-frequency ambient background noise, and heavy-duty construction for minimal pickup of surface vibration. The microphone is available in two colors: black (ES961) and white (ES961W); it is also available with a �� TRS phone plug that permits easy mounting and removal (ES961P).

Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing

Low-profile design for minimum visibility

Heavy die-cast case and rubber bottom pad minimize coupling of surface vibration to the microphone

25' (7.6 m) detachable cable (TA3F to XLRM-type)

Also available in white as ES961W

SPECIFICATIONS
ELEMENT	Fixed-charge back plate, permanently polarized condenser (field replaceable)
POLAR PATTERN	Half-cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE	30-20,000 Hz
LOW FREQUENCY ROLL-OFF	150 Hz, 6 dB/octave
OPEN CIRCUIT SENSITIVITY	-33 dB (22.4 mV) re 1V at 1 Pa
IMPEDANCE	200 ohms
MAXIMUM INPUT SOUND LEVEL	130 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	103 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	67 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	9-52V DC, 2 mA typical
SWITCH	Flat, low-roll-off
WEIGHT	5.1 oz (145 g)
DIMENSIONS	3.59" (91.3 mm) long, 2.87" (73.0 mm) maximum width
OUTPUT CONNECTOR	TB3M
CABLE	25' (7.6 m) long, 0.13" (3.2 mm) diameter cable terminating in TA3F and XLRM-type connectors
ACCESSORY FURNISHED	Protective pouch