ESW-T211 UHF Synthesized UniPak® Body-pack Transmitter (DISCONTINUED)
The lightweight, durable ESW-T211 UniPak® body-pack transmitter offers superior performance for speakers, instrumentalists and others who need a wearable transmitter. Designed for easy operation, an on-off switch and three-color battery condition indicator are located in plain view. Frequency switches and other setup controls are hidden or recessed to reduce the possibility of unintended mis-adjustment. A premium locking-type audio input connector provides for secure operation. The transmitter accepts microphone-level and instrument-level inputs, and provides the voltage needed to operate electret condenser mics. A variety of Wireless Essentials™ accessory microphone and cables—including clip-on, headworn, boundary and gooseneck mics—are pre-wired to match the transmitter’s input. A recessed high-pass switch permits the rolling off of low frequencies from the microphone.
- 100 PLL-synthesized channels, switch-selectable
- Interference-resistant UHF band operation
- Special Tone Lock™ inaudible transmitted signal opens the receiver's output, assuring only intended reception
- Inputs for microphone and instrument in professional locking connector
- On-off switch and battery condition indicator easily accessible
- Frequency controls, Hi/Lo power switch and input level controls "under cover"
- Separate input level controls for mic and instrument
- Recessed high-pass switch for mic input
- Reversible, interchangeable mounting clips for versatile positioning of unit
- Operates on two long-lasting, readily-available 1.5V AA batteries
- Combines excellent performance, light yet robust construction and convenient operation
- Engineered Sound wireless transmitters and receivers are offered separately, rather than in pre-set combinations, to permit choosing exactly the right components for your particular application:
ESW-R210 UHF Synthesized True Diversity Receiver
ESW-R220 UHF Synthesized True Diversity Dual Receiver
ESW-T212 UHF Synthesized Plug-on Transmitter
ESW-T214 UHF Synthesized Handheld Microphone/Transmitter
The ESW-T211 is compatible with all Wireless Essentials® microphones and cables.
OVERALL SYSTEM SPECIFICATIONS
|
| |
| Operating Frequency |
UHF band, 728.125 MHz to 740.500 MHz |
|
| Number of Channels |
100 total |
|
| Frequency Stability |
±0.005%, Phase Lock Loop frequency control |
|
| Modulation Mode |
FM |
|
| Normal Deviation |
±5 kHz |
|
| Tone Squelch Frequency |
32.768 kHz |
|
| Operating Range |
300' typical |
|
| Operating Temperature Range |
41° F (5° C) to 113° F (45° C) |
|
| Frequency Response |
100 Hz to 15 kHz |
| |
BODY-PACK TRANSMITTER SPECIFICATIONS
|
| |
| RF Power Output | Max 50 mW (Hi : 10 mW ; Lo : 5 mW, nominal) |
|
| Spurious Emissions | Under federal regulations |
|
| Input Connections | High impedance, low impedance, bias |
|
| High-pass (low-freq. roll-off) | 150 Hz, 6 dB/octave (mic input only) |
|
| Batteries | Two 1.5V AA alkaline (not included) |
|
| Current Consumption | High: 130 mA; Low: 120 mA, typical |
|
| Battery Life | Approximately 12 hours (High); 14 hours (Low), depending on battery type and use pattern |
|
| Dimensions | 2.56" (65.0 mm) W x
6.57" (167.0 mm) H x
1.02" (26.0 mm) D |
|
| Net Weight | 2.7 oz (75 grams) |
|
| |
Conditions