200 Series VHF Handheld and Body-pack Systems -

Audio-Technica’s 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency.

Non-diversity single-channel dual antenna system

Available in three travelling frequencies

Adjustable squelch control

SYSTEM CONFIGURATIONS

	200 Series Guitar R250 receiver and T201 transmitter with AT8319 Hi-Z instrument/guitar cable with 1/4" phone plug

	200 Series Presenter R250 receiver and T201 transmitter with AT829cW miniature cardioid condenser lavalier microphone. Includes clothing clip and windscreen

	200 Series Active R250 receiver and T201 transmitter with PRO8HEcW

	200 Series Options R250 receiver and T201 transmitter. No microphone.

	200 Series Vocal R250 receiver and T202 handheld transmitter

OVERALL SYSTEM SPECIFICATIONS



Operating Frequency	VHF high band, 173.800 MHz, 174.600 MHz and 175.000 MHz

Number of Channels	Fixed channel

Frequency Stability	±0.005%

Modulation Mode	FM

Maximum Deviation	±15 kHz

Operating Range	70m typical

Operating Temperature Range	40° F (4° C) to 110° F (43° C)

Frequency Response	80 Hz to 13 kHz

RECEIVER SPECIFICATIONS



Receiving System	Non-diversity, single-channel, dual antenna system

Image Rejection	50 dB minimum

Signal-to-noise Ratio	80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz

Total Harmonic Distortion	<=1% (10 kHz deviation at 1 kHz)

Sensitivity	20 dBµV for 60 dB S/N (IEC-weighted)

Audio Output	350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)

Output Connector	1/4" TS ("mono") phone jack

Power Supply	230V AC (50Hz) to 12V DC, 500 mA (centre positive), external

Dimensions	190.0 mm W x 42.0 mm H x 130.0 mm D

Net Weight	311 grams

Accessories Included	Power Supply

BODY-PACK TRANSMITTER SPECIFICATIONS



RF Power Output	10 mW High position, 2 mW Low position, typical

Spurious Emissions	According to R&TTE Directive

Dynamic Range	>=90 dB, A-weighted

Input Connections	High impedance, low impedance, bias

Battery	9V battery (NEDA type 1604) alkaline, not included

Current Consumption	30 mA typical

Battery Life	Approximately 15 hours (high), 20 hours (low);

Dimensions	65.0mm W x 110.0 mm H x 25.4 mm D

Net Weight	78 grams (without battery)

HANDHELD TRANSMITTER SPECIFICATIONS



RF Power Output	10 mW typical (high); 2 mW (low), typical

Spurious Emissions	According to R&TTE Directive

Dynamic Range	>=90 dB, A-weighted

Microphone Element	Dynamic unidirectional

Battery	9V (NEDA type 1604) alkaline, not included

Current Consumption	30 mA typical

Battery Life	Approximately 15 hours (high); 20 hours (low)

Dimensions	241.3 mm long; 53.3 mm diameter

Net Weight	360 grams

Accessory Included	AT8456a Quiet-Flex stand clamp