AT-ONE

AT-ONE UHF Wireless System

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications

  • Overview


    Audio-Technica’s AT-ONE UHF wireless system gives entry-level users exactly what they need: an affordable, easy-to-use system with accurate, reliable performance.

    The system’s best-in-class frequency plan is divided into two groups, the LTE duplex gap and the license-free frequency range (824-831 MHz and 863-865 MHz), with four channels available in each. Despite this flexibility, the AT-ONE features a simple interface that makes it easy for anyone to operate.

    Each AT-ONE system includes an ATW-R1 receiver with detachable antennas, a rack mount adapter, a carrying case, and either an ATW-T1 body-pack transmitter or an ATW-T3 cardioid condenser handheld transmitter. Each transmitter provides 10 mW RF power output, with up to 10 hours of battery life (depending on battery type and use pattern). The ATW-T1 features a discreet-yet-rugged design, a 4-pin HRS connector for use with Audio-Technica wireless microphones, and a damping switch.
  • Features

    • Provides easy-to-use, reliable performance at an affordable price

    • 2 x 4 channel frequency plan: 4 channels each in the LTE duplex gap and the license-free frequency range (824-831 MHz and 863-865 MHz)

    • ATW-R1 receiver includes detachable antennas

    • Two available configurations: ATW-11 body-pack system and ATW-13 handheld system

    • Transmitters offer 10 mW RF power output, and up to 10 hours of battery life from two AA batteries (depending on battery type and use pattern)

    • ATW-T1 body-pack transmitter is equipped with a 4-pin HRS connector for use with Audio-Technica wireless microphones

    • Includes rack mount adapter and carrying case

  • Specifications

    OVERALL SYSTEM SPECIFICATIONS
    Operating Frequency 824-831 MHz, 863-865 MHz
    Number of Channels 2 x 4 frequencies
    Frequency Stability ±0.005%, Phase lock loop frequency control
    Modulation Mode FM
    Operating Range 60 m, typical
    Frequency Response 60 Hz to 16 kHz
    RECEIVER SPECIFICATIONS
    Receiving System Antenna switching diversity
    Image Rejection 55 dB minimum
    Total Harmonic Distortion <1% (±20 kHz deviation at 1 kHz)
    Sensitivity 10 dBuV (S/N 60 dB at 20 kHz deviation)
    Audio Output Unbalanced: -2 dBV; Balanced: 4 dBV
    Audio Output - Microphone XLRM-type, balanced
    Audio Output - Instrument 6.3 mm (1/4") unbalanced mono jack
    Antenna Input BNC-type, 50 ohms Bias voltage 12V DC, 100 mA each
    Dimensions 200.0 mm (7.87") W x 42.0 mm (1.65") H x 122.0 mm (4.80") D
    Net Weight 418 g (14.74 oz), without accessories
    Accessories Included AC adapter, Antennas, Rack-mount adapter, Protective carrying case
    BODY-PACK TRANSMITTER SPECIFICATIONS
    RF Power Output10 mW
    Spurious EmissionsFollowing federal and national regulations
    Input ConnectionsFour-pin Locking Connector
    Pin 1: GND
    Pin 2: INST
    Pin 3: MIC
    Pin 4: DC BIAS +10V
    BatteriesTwo 1.5V AA, not included
    Battery Life10 hours (alkaline)
    Depending on battery type and use pattern
    Dimensions66.0 mm (2.60") W x 98.0 mm (3.86") H x 22.0 mm (0.87") D
    Net Weight71 g (2.5 oz)
    without batteries
    HANDHELD TRANSMITTER SPECIFICATIONS
    RF Power Output 10 mW
    Spurious Emissions Following federal and national regulations
    Microphone Element Condenser cardioid
    Batteries Two 1.5V AA, not included
    Battery Life 10 hours (alkaline)
    Depending on battery type and use pattern
    Dimensions 268.0 mm (10.55") long, 52.0 mm (2.05") diameter
    Net Weight 277 g (9.8 oz)
    without batteries
    Accessory Included Stand clamp



    Conditions