ESW-T212 UHF Synthesized Plug-on Transmitter (DISCONTINUED)
Designed to complement the Engineered Sound True Diversity UHF ESW-R220 dual receiver or ESW-R210 single receiver, the ESW-T212 plug-on transmitter converts a wired handheld dynamic or battery-powered condenser microphone to wireless performance. The unit features interference-resistant UHF band operation and A-T’s sophisticated Tone Lock™ tone squelch system that opens the receiver’s audio circuits only when an Engineered Sound transmitter is detected. Other features include easily accessible frequency controls, mic level control, power switch and battery condition indicator.
- Converts a "wired" handheld dynamic or battery-powered condenser microphone to wireless
- 100 PLL-synthesized channels, switch-selectable
- Interference-resistant UHF band operation
- Special Tone Lock™ inaudible signal opens the receiver's audio output, assuring only intended reception
- Easily accessible frequency controls, mic level control, On/Standby/Off switch and battery condition indicator
- Operates on one long-lasting, readily-available 9V battery
- Combines excellent performance, robust construction and convenient operation
- Engineered Sound wireless transmitters and receivers are offered separately, rather than in pre-set combinations, to permit choosing exactly the right components for your particular application:
ESW-R210 UHF Synthesized True Diversity Receiver
ESW-R220 UHF Synthesized True Diversity Dual Receiver
ESW-T211 UHF Synthesized UniPak® Body-pack Transmitter
ESW-T214 UHF Synthesized Handheld Microphone/Transmitter
OVERALL SYSTEM SPECIFICATIONS
|
| |
| Operating Frequency |
UHF band, 728.125 MHz to 740.500 MHz |
|
| Number of Channels |
100 total |
|
| Frequency Stability |
±0.005%, Phase Lock Loop frequency control |
|
| Modulation Mode |
FM |
|
| Normal Deviation |
±5 kHz |
|
| Tone Squelch Frequency |
32.768 kHz |
|
| Operating Range |
300' typical |
|
| Operating Temperature Range |
41° F (5° C) to 113° F (45° C) |
|
| Frequency Response |
100 Hz to 15 kHz |
| |
PLUG-ON TRANSMITTER SPECIFICATIONS
|
| |
| RF Power Output |
10 mW typical |
|
| Spurious Emissions |
Under federal regulations |
|
| Input Connectors |
3-pin XLRF-type |
|
| Battery |
9V (NEDA type 1604) alkaline
(not included) |
|
| Current Consumption |
60 mA, typical |
|
| Battery Life |
Approximately 7 - 9 hours
(depending on battery type and use pattern) |
|
| Dimensions |
1.58" (40.0 mm) W x
4.32" (109.8 mm) H x
1.58" (40.0 mm) D |
|
| Net Weight |
6.2 oz (177 grams)
(without battery) |
|
| |
Conditions