System 10 Digital Wireless Systems

Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Featuring stackable, contemporary styling, System 10 is available in multiple system configurations, with handheld vocal microphone/transmitters and UniPak® body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars. Each configuration includes the ATW-R1100 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance

2.4 GHz range – completely free from TV interference

Three levels of diversity assurance: frequency, time, & space

Automatic frequency selection for seamless, interference-free operation

Extremely easy operation with instantaneous channel selection, sync, and set-up

State-of-the-art digital receiver for reliable performance

Balanced XLR and unbalanced 1/4” output jacks with level control

SYSTEM CONFIGURATIONS

	ATW-1101 ATW-R1100 receiver and ATW-T1001 UniPak® transmitter. Select a Wireless Essentials® microphone or cable to complete the system.

	ATW-1101/G ATW-R1100 receiver and ATW-T1001 UniPak® transmitter with AT-GcW guitar/instrument input cable.

	ATW-1101/H ATW-R1100 receiver and ATW-T1001 UniPak® transmitter with PRO 8HEcW headworn microphone.

	ATW-1101/H92 ATW-R1100 receiver and ATW-T1001 UniPak® transmitter with PRO 92cW headworn microphone.

	ATW-1101/H92-TH ATW-R1100 receiver and ATW-T1001 UniPak® transmitter with PRO 92cW-TH headworn microphone (beige).

	ATW-1101/L ATW-R1100 receiver and ATW-T1001 UniPak® transmitter with MT830cW omnidirectional lavalier microphone.

	ATW-1102 ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex™ stand clamp.

OVERALL SYSTEM SPECIFICATIONS



Operating Frequencies	2.4 GHz ISM band

Dynamic Range	>109 dB (A-weighted), typical

Total Harmonic Distortion	<0.05% typical

Operating Range	30 m (100') typical Open range environment with no interfering signals

Operating Temperature Range	0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures

Frequency Response	20 Hz to 20 kHz Depending on microphone type

RECEIVER SPECIFICATIONS



Receiving System	Diversity (frequency/time/space)

Maximum Output Level	XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV

Power Supply	100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply

Dimensions	190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D

Net Weight	290 grams (10.2 oz)

Accessory Included	Power supply

BODY-PACK TRANSMITTER SPECIFICATIONS



RF Power Output	10 mW

Spurious Emissions	Following federal and national regulations

Input Connections	Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V

Batteries	Two 1.5V AA not included

Battery Life	>7 hours (alkaline) Depending on battery type and use pattern

Dimensions	70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D

Net Weight	100 grams (3.5 oz) without batteries

HANDHELD TRANSMITTER SPECIFICATIONS



RF Power Output	10 mW

Spurious Emissions	Following federal and national regulations

Batteries	Two 1.5V AA not included

Battery Life	>7 hours (alkaline) Depending on battery type and use pattern

Dimensions	254.8 mm (10.03") long, 50.0 mm (1.97") diameter

Net Weight	280 grams (9.9 oz) without batteries

Accessory Included	AT8456a Quiet-Flex™ stand clamp