1_TEST KIBO 200 Series

VHF Handheld and Body-pack Systems -

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • Overview
  • Features
  • Configurations
  • Specifications
  • Downloads

  • Overview

    Audio-Technica’s 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency.
  • Features

    • Non-diversity single-channel dual antenna system

    • Available in three travelling frequencies

    • Adjustable squelch control

  • Configurations

    Non diversity VHF Guitar Radio System
    200 Series Guitar
    R250 receiver and T201 transmitter with AT8319 Hi-Z instrument/guitar cable with 1/4" phone plug
    Non diversity VHF Lavalier Radio System
    200 Series Presenter
    R250 receiver and T201 transmitter with AT829cW miniature cardioid condenser lavalier microphone. Includes clothing clip and windscreen
    Non diversity VHF Headworn Radio System with dynamic mic
    200 Series Active
    R250 receiver and T201 transmitter with PRO8HEcW
    Non diversity VHF Radio System to choose your own mic
    200 Series Options
    R250 receiver and T201 transmitter. No microphone.
    Non diversity VHF Handheld Radio System
    200 Series Vocal
    R250 receiver and T202 handheld transmitter
  • Specifications

    Operating Frequency VHF high band, 173.800 MHz, 174.600 MHz and 175.000 MHz
    Number of Channels Fixed channel
    Frequency Stability ±0.005%
    Modulation Mode FM
    Maximum Deviation ±15 kHz
    Operating Range 70m typical
    Operating Temperature Range 40° F (4° C) to 110° F (43° C)
    Frequency Response 80 Hz to 13 kHz
    Receiving System Non-diversity, single-channel, dual antenna system
    Image Rejection 50 dB minimum
    Signal-to-noise Ratio 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
    Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
    Sensitivity 20 dBµV for 60 dB S/N (IEC-weighted)
    Audio Output 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
    Output Connector 1/4" TS ("mono") phone jack
    Power Supply 230V AC (50Hz) to 12V DC, 500 mA (centre positive), external
    Dimensions 190.0 mm W x 42.0 mm H x 130.0 mm D
    Net Weight 311 grams
    Accessories Included Power Supply
    RF Power Output10 mW High position, 2 mW Low position, typical
    Spurious EmissionsAccording to R&TTE Directive
    Dynamic Range>=90 dB, A-weighted
    Input ConnectionsHigh impedance, low impedance, bias
    Battery9V battery (NEDA type 1604) alkaline, not included
    Current Consumption30 mA typical
    Battery LifeApproximately 15 hours (high), 20 hours (low);
    Dimensions65.0mm W x 110.0 mm H x 25.4 mm D
    Net Weight78 grams (without battery)
    RF Power Output 10 mW typical (high); 2 mW (low), typical
    Spurious Emissions According to R&TTE Directive
    Dynamic Range >=90 dB, A-weighted
    Microphone Element Dynamic unidirectional
    Battery 9V (NEDA type 1604) alkaline, not included
    Current Consumption 30 mA typical
    Battery Life Approximately 15 hours (high); 20 hours (low)
    Dimensions 241.3 mm long; 53.3 mm diameter
    Net Weight 360 grams
    Accessory Included AT8456a Quiet-Flex stand clamp

  • Downloads

    200 Series Owners Manual (pdf 0.98 M)
    Wireless Mics & Cables Wireless System Accessories Using Wireless