Audio-Technica Menu

ATW-CHG3N

Networked Two-Bay Charging Station (3000 Series)


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Downloads

  • Overview

    The ATW-CHG3N is a networked two-bay charging station for use with 3000 Series (fourth generation) handheld (ATW-T3202) and body-pack (ATW-T3201) transmitters. The station charges NiMH batteries (not included) while they are housed within a transmitter. It will automatically shut off if alkaline or damaged batteries are detected. Once fully charged, a maintenance charging function ensures that batteries retain their full power for as long as the transmitter remains in the charging station.

    The ATW-CHG3N is equipped with power and charging status indicator LEDs for easy monitoring.

    Using the AT8687 link kit and AD-SA1230XA AC adapter (sold separately*), the ATW-CHG3N can be linked with up to four ATW-CHG3 stations and be powered by a single power supply. The ATW-CHG3N also connects to networks via standard Ethernet cable, allowing the charging status of all transmitters in linked stations (both ATW-CHG3N and ATW-CHG3) to be monitored through the dedicated Audio-Technica app or third-party software.

    * The AD-SA1230XA is also available bundled with an ATW-CHG3N networked charging station: ATW-CHG3NAD.

    Specifications:
    Power Requirements: 12V DC 3.0 A
    Charging Output: 3.6V DC 500 mA (x2)
    Power Consumption: 5.3 W (when 2 transmitters are charging)
    27.8 W (when CHG3N and four CHG3 units are connected and 10 transmitters are charging)
    Charging Time: Approx. 6.5 hours (1,900 mAh rechargeable battery)
    Depending on battery type and use pattern.
    Operating Temperature Range: 0 C to 40 C (32 F to 104 F)
    Dimensions: 185 mm (7.28") x 99 mm (3.90") x 68.5 mm (2.70") (W x D x H)
    Net Weight: 410 g (14.5 oz)

  • Features


    • Two-bay charging station for use with 3000 Series (fourth generation) handheld (ATW-T3202) and body-pack (ATW-T3201) transmitters

    • Charges NiMH batteries (not included) while they are housed within a transmitter

    • Automatically shuts off if alkaline or damaged batteries are detected

    • Indicator LEDs for easy monitoring of power and charging status

    • Up to five ATW-CHG3N/ATW-CHG3 charging stations can be linked and powered by a single power supply (using AT8687 link kit and AD-SA1230XA AC adapter, sold separately)

    • ATW-CHG3N connects to a network (via standard Ethernet cable), allowing the charging status of all transmitters in linked stations (both ATW-CHG3N and ATW-CHG3) to be monitored through the dedicated Audio-Technica app or third-party software

    • Transmitters power off automatically when placed in the charging station and power on automatically when removed

  • Downloads

    ATW-CHG3/ATW-CHG3N Manual (pdf 872.94 KB)
    ATW-CHG3/ATW-CHG3N Quick Start Guide (pdf 804.55 KB)
    ATW-CHG3/ATW-CHG3N FCC DOC (pdf 201.03 KB)
    ATW-CHG3N IP Control Protocol Specifications (pdf 813.34 KB)
    3000 Series Charger Configuration Sheet (pdf 910.52 KB)
    Charger IP Tool Manual (pdf 190.79 KB)
    Charger IP Tool (.zip file) (zip 1.46 M)