*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.
BUY NOW
Tom
Yes, You may use any AT wireless microphone that ends in the code "cW" which indicates the cable properly terminates with the 4 pin HRS connection used on your Audio-Technica UniPak transmitter.
ATUS_Specialist3
Avery
Thank you for your inquiry. Do you currently have a wireless system to use this mic with? Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for assistance with this.
ATUS_Specialist4
MattRS
Thank you for your inquiry. Feedback is not actually the fault of the microphone. Feedback occurs when the amplified sound from any loudspeaker reenters the sound system through a microphone and is amplified again and again causing a loop. To avoid or lessen the likelihood of feedback try some of these steps: - Keep the loudspeakers in front of the microphone and or pointing away from the microphone. If the speakers are behind the microphone, then feedback is nearly guaranteed. Since this is an Omni directional microphone it is even more important to keep the microphone out of the direct fire of speakers. - On the belt pack transmitter lower thin input gain and compensate by turning up the volume at the board. This will in effect reduce the sensitivity of the microphone and can help reduce feedback. - Use an equalizer or feedback eliminator to dampen the frequencies where feedback is occurring. Please let me know if you need additional information.
AudioSolutionsManager
Greg782
Thank you for your inquiry. This microphone will work with any of our belt pack transmitters, but of course we have systems ranging from under $100 to several thousand dollars, so you will need to let your budget be the guide. Please note that our 3000 series is our most popular system.
AudioSolutionsManager
Greg782
Thank you for your inquiry. Yes, the BP893cW-TH will work with this transmitter.
AudioSolutionsManager
Paula
Thank you for your inquiry. The BP893cW-TH will work with your Audio-Techncia body pack wireless systems. The "cW" in the name of any of our wireless microphones means that it is terminated for an Audio-Techncia body pack wireless system.
AudioSolutionsManager