Audio-Technica Menu

BP892cW MicroSet®

Subminiature Omnidirectional Condenser Headworn Microphone


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Downloads
  • Reviews
  • Q & A

  • Overview

    BP892 Subminiature Omnidirectional Condenser Headworn Microphone, less power module. 55” (1.4 m) permanently attached miniature cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack transmitters. Includes AT8440 cable clip, AT8464 dual-ear microphone mount, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. See BP892c for specifications.

  • Features


    • Handles high sound pressure levels with ease
    • Extremely intelligible natural audio
    • Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility
    • Ergonomic under-ear design—flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
    • Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
    • Available in black and beige, wired and wireless models; See BP892 for more details


  • Downloads

    BP892 MicroSet Specification Sheet (pdf 945.75 KB)
  • Reviews

  • Q & A

    Hi. I bought 3 BP892 for replacing old headsets of my atw2192b. The headworns that the dealer sent to me was wired with 3.5mm locking connector. I replace those connectors with hirose 4 pin for AT. I can't have a single working set. I'm following the wireless termination diagrams included. Pinout seems to be OK, but having no audio. those mics seems to be a different impedance that my old ones. Can be that the reason? Thank you for your help

    carlos

    Thank you for your inquiry. You were sent microphones that are configured for Sennheiser wireless systems. Those have additional components in the microphone that convert it to a two wire mic. Simply replacing the connector will not work.

    AudioSolutionsManager

    My mic has a break in the wire at the rubber grommet. The sound has started to cut in and out like there may be a short in the wire. Can this be fixed easily?

    Henry

    Thank you for your inquiry. Please contact our Service department at 330-686-2600 option 4. They can help with this.

    AudioSolutionsManager

    I am confused, with my atw-r600 module, I use a standard wireless mic.---the picture shown of BP892cW shows a wire extending somewhere, I assumed there is no wire to attach, since this is wireless?

    Joe

    Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for assistance with this.

    ATUS_Specialist3

    do you have adaptors to fit bp892cw headset microphones to sennheiser G3 body pack transmitters?

    krish

    Thank you for you inquiry. We do not have adapters for this, but we do make versions of the microphone specifically for Senneheiser. The BP892CLM3 (3.5 locking connector) and the BP892clm4 (Lemmo conenctor).

    AudioSolutionsManager