Audio-Technica Menu

AT6006R

Safety Raiser


U.S. One-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Reviews
  • Q & A

  • Overview

    Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.

    Specifications
    Dimensions: 14 mm (0.55") diameter 27 mm (1.06") to 39 mm (1.54") height*
    Lift bar movable width: 3 mm (0.12")
    Weight: Approx. 21 g (0.74 oz)
    Accessories: Double-sided tape 4, Spacer 2 (14 mm (0.55") diameter 12 mm (0.47") height; 14 mm (0.55") diameter 24 mm (0.94") height)

    * In standby. Height can be adjusted by using the height-adjustment knob and included spacers.

  • Features


    • Lifts tonearm automatically at the end of a record, protecting stylus tip

    • Hydraulic lift with rubber lift bar operates safely and smoothly

    • Can be mounted on a variety of turntables with different tonearm heights

  • Reviews

  • Q & A

    Will this be compatible with a ProJect 2Xperience SB?

    Dave

    You may use with any turntable where there is at least 14mm between the platter and the base of the tone arm. You may confirm the space with your turntable manufacturer.

    Brent

    Will it work with your AT-LP-120? It does not look like there is enough room to fit it in there.

    Nicholas

    No it will not.

    Brent

    AT6006R with AT-LP7 turntable?

    Rogers

    Yes it will.

    Brent

    Will this tone arm lift work with the Technics SL1200GAE ?

    Lance

    It appears the listed turntable does not have at least 14mm between the platter and the tone arm base, which is required for the AT6006R. You may verify this information with the turntable manufacturer.

    Brent

    Is there a tone arm lift for the AT-LP120-USB?

    Terry

    No there is not.

    Brent

    Will this work with a music hall mm7?

    Dan

    You may use the AT6006R with any turntable where there is a clearance of at least 14mm between the tone arm base and the platter. You may confirm this distance with your turntable manufacturer.

    Brent

    This sounds like a product I would like to have. Can you give me some detailed info on how the hell it works? Thanks

    Michael

    You may find helpful information here: https://blog.audio-technica.com/audio-solutions-question-of-the-week-how-do-i-set-up-the-at6006r-safety-raiser-to-automatically-lift-the-tonearm-on-my-turntable/

    Brent

    Red Ball wire wire button gone Why ??? How to turn off lift ???

    DN60

    If the actuating lever is broken, I recommend exchanging at your point of purchase.

    Brent

    Will the product AT6006R Safety Raiser fit and work on my 10 year old AT-120 - non-usb?

    Tommay

    No, there is not enough clearance between the platter and the tone arm base.

    Brent

    Will this fit on the AT-LP120-USB or AT-LP1240-USBXP Turntables?

    Bob

    No, you need at least 14 mm of space between the platter and the tone arm assembly to mount the safety riser. You may currently use the AT6006R with the AT-LP5 and AT-LP7 turntables.

    Brent