Audio-Technica Menu


Guitar Input Cable for Wireless

U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • Overview
  • Downloads
  • Reviews
  • Q & A

  • Overview

    1/4" phone plug to locking 4-pin connector for use between instrument and Audio-Technica cW-style body-pack transmitters. 36" (0.9 m) cable.

  • Downloads

    Wireless Essentials® Accessory Microphones and Input Cables Specification Sheet (pdf 44.38 KB)
  • Reviews

    The wireless systems are great protect your inst cables


    In general the wireless unit I got was great. The cable started breaking after a year to year and a half. Making a much more durable cable would be optimal. The 1/4" part was fine. It was the 4 din pin end and cable that broke. Purchasing a new cable not expensive but didn't expect to have to in such a shore amount of time... Protect your cable-maybe tape it at ends if they have not made the cables more durable...

    Ft. Lauderdale, Fl.


    AT-GcW Guitar Input Cable for Wireless

    3.0 1


  • Q & A

    I have an ATW-T701 body pack. What is the correct cable I need to either goto a microphone or guitar?


    To plug into a LINE level signal, such as a guitar, yes the AT-GcW will work for you. To connect a MIC level dynamic microphone, you may use the XLRW cable.


    I have an ATW-T31 bodypack that works with headset mic. Based on a question and answer on your website, I bought a brand new 1/4" instrument cable attachment from an audio Technica dealer, but it does not work. Did you change the wiring in recent years, or is there some internal adjustment in the body pack to switch from mic to line ?


    Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at for assistance with this.


    is it compatable with atw-t310


    Thanks for your inquiry. Yes, the AT-GcW is compatible with the ATW-T3110.

    Is this compatible with the ATW-T1001 model?


    Thank you for your inquiry. Yes the AT-GcW will plug into your T1001 Unipak transmitter.


    Is this cable compatible with the System 10 UniPak Transmitter?


    Thank you for your inquiry. Yes this cable will work with the System 10 Unipak Transmitter.


    will this cable work with my ATW-T31 transmitter?


    Thank you for your inquiry. Yes, it will.


    Hi Will this work with my ATW - T51? The original cable has developed a fault


    To provide you with the best possible answer/support, please contact the Audio-Technica division for your world area:


    I have a DR-2000 Series DR-R22 Receiver wireless guitar transmitter and I need a new cable for the receiver, as it is broken-it cradles and cuts in and out. I am wondering if the AT-GcW guitar cable is compatible for my wireless unit that I bought a few years ago? Is this guitar cable part a universal part for receivers after a certain year? Thank you for your answer


    Yes, the AT-GcW will work.


    Is there a different setting when using wireless guitar cable? What settings do we change to on body pack or receiver when using the guitar cable(1/4 in jack to HRS(4pin). We have the at-3000 series. Plugged in wireless cable to the guitar, but getting no sound, but using a lapel mic it works. Is there a setting we change to on the body pack?


    Change the Audio Input Selector on the 3000 Series bodypack transmitter from MIC (microphone) to INST (instrument) to use the 1/4" guitar cable. To do this, power on the transmitter and tap the SET button briefly to enter the MENU mode. Tap the UP arrow button 3 times and you should see the word MIC appear in the display. To change the input selection to INST, tap the set button again to enter the EDIT mode. Tap either the UP or the DOWN arrow button once to change the selection to INST. Now PRESS and HOLD the SET button to store the setting in the transmitters memory. You will see the word STORED appear in the display to confirm the selection has been changed. Tap the DOWN arrow button twice and you should see the word QUIT appear in the display. Tap the SET button briefly to exit the menu and return your transmitter to normal operation.


    What is the correct wiring of the 4 pin connector to the 2 pin mono 1/4" plug? I'm looking how to wire this 4 pin connector with the outer sheild, 2 red wires, and 2 yellow wires correctly to a 1/4" mono plug for an instrument.


    Please contact Audio-Solutions.