Audio-Technica Menu


Subminiature Cardioid Condenser Lavalier Microphone

U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • Overview
  • Reviews
  • Q & A

  • Overview

    55 (1.4 m) permanently attached miniature cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack transmitters. Includes accessory kit. See AT898.

  • Reviews

  • Q & A

    Is the four-pin locking connector (cW-style) sold separately?


    Please contact our Parts Department at (330) 686-2600 ext 5002 or at for assistance with purchasing replacement cW-style connectors.


    Will this work with the ATW-T1001 transmitter?


    Yes, you may use any wireless microphone ending in the "cW" code indicating it may be used with cW-Style connection transmitters including the ATW-T1001.


    Will this microphone work for the model ATW-701 transmitter?


    Yes, you may use any wireless microphone that ends in the code "cW" which indicates the cable properly terminates with the 4 pin push locking connection used on your Audio-Technica "cW Style" beltpack transmitter.


    I need a Audio-Technica AT898cW WINDSCREEN


    Thank you for your inquiry. The model # of the windscreens for the AT898 mic is the AT8151 windscreens.


    Is there an adapter where this 4-pin would work as a mic into an iPhone? We love the mic quality.


    Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at for assistance with this.


    Will this work with ATW-T310?


    Yes this microphone will work with any Audio-Technica UniPak transmitter.


    Will the AT898cW work with the ATW-T31?:


    Yes, the 1000 Series UniPak transmitter (ATW-T31) utilizes the 4 pin HRS connector and the "cW" code at the end of the AT898cW indicates the cable terminates with the same 4 pin HRS connector.


    part number for clothing clip on AT898cW lavalier mic For the AT898cW lav mic, what is the part number for the clothing clip to attach the mic to a tie or shirt? I am not refering to the AT8439 cable clip.


    AT8461 is the model number for the alligator style clip with holder. AT8462 is the model number for the viper (pins) clip with holder. Note that both clips utilize a snap-in holder that holds the microphone cable, NOT the microphone itself.


    What mic can I get to work with a ATW-T31 transmitter pack?


    Thank you for your inquiry. Any of our wireless microphones with a "cW" in the name will work with this transmitter such at the AT831cW, AT898cW and the AT899cW.


    Will this mic work with model ATW-T51 We have some older model wireless transmitters and the cables are begining to wear out or break.


    Thank you for your inquiry. Yes, this will work with the wireless system, but please note the following information. The FCC auctioned off the 700 MHz frequency spectrum to cell phone companies and has ruled that wireless microphones can no longer operate in that spectrum as of June 2010. These systems are in the 700 MHz spectrum and were affected by the auction. The FCC has also ruled that companies cannot sell or service any wireless microphones in the 700 MHz spectrum. I regret to say there is no "re-crystal" option for any of the discontinued 700 MHz A-T wireless. Our wireless are either crystal controlled (single frequency wireless) or frequency agile (phase locked loop multiple frequency capable wireless) designed to operate within a specific frequency spectrum. The RF spectrum capability of the wireless is determined by frequency specific components. Our crystal controlled wireless could be frequency changed within the band they were designed to operate in, but it is not possible to change either crystal controlled or frequency agile wireless out of the spectrum band they were designed to operate within. We offered a rebate program for our 700 MHz customers for about 2 years, but this program ended in June of 2010.