Audio-Technica Menu

AT8630

Joining-plate Kit


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Reviews
  • Q & A

  • Overview

    Joining-plate kit for 3000 Series (Third Generation) and 2000 Series receivers. Allows mounting two receivers in a single 19" rack space.



  • Reviews

  • Q & A

    Will the AT8630 allow me to rack mount two AT W-R3100b receivers side by side?

    Spencer

    Thank you for your inquiry. Yes this is the correct joining plate for your receivers.

    Kaylee

    My question is exaclty the same posted some years ago. "Can an ATW-R3100b and an M3T be mounted side-by-side in a rack? Would I need to use the AT8630 joining-plate, or the AT8623 joining-plate?" Please answer the question from the mechanical perspective first. Then, explain why is not recomended even with different frequencies. This is the reality of most of musicians that use in-ear and guitar transmitters .. we really would like to have both units in the same rack. The use of units side by side saves a lot of space in the rack,

    Alex

    Thank you for your inquiry. First, we do not make a joining plate that will join a 3000 series and an M3T. The reason we do not is that we highly recommend doing so. Any transmitter such as an IEM , assisted listening or even the wireless microphone transmitter will raise the RF noise floor and possibly create intermod.

    AudioSolutionsManager

    Does this kit come with rack ears?

    Linda

    No, you use the rack ears that come with the wireless systems. If you require replacements, please contact our Parts Department at (330) 686-2600 ext 5002 or at Parts@atus.com for assistance with this.

    ATUS_Specialist3

    Can the antennas be front-mounted when mounting 2 receivers side-by-side? If not, what is recommended when mounting in a metal wall-mounted rack?

    Coronos

    To answer your question, no you cannot do that. However, there are a couple easy solutions that we could provide for you. Your best bet would be to contact us directly at Audio-Solutions@atus.com or at (330)-686-2600 ext. 5000

    ATUS_Specialist4

    I have two AT series 2000 receivers that I want to mount in a 19" rack.What does the AT8630 kit have in it?I will need rack ears,screws to fit the receivers and any thing else to get them mounted.

    N/A

    Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for assistance with this.

    ATUS_Specialist3

    What size are the screws needed to mount the brackets? What size are the screws needed to mount the brackets to the receiver itself (the little screws, not your 10-32 rack screws)? I need just replacement screws...

    cornedbeefhash

    Please contact our Parts Department at (330) 686-2600 ext 5002 or at Parts@atus.com for assistance with this.

    AudioSolutionsSpec3

    Wii I have interference if I mount two R3100b receivers side by side in a rack?

    CurtisB68

    A joining-plate (such as the AT8630), and and of itself, will not cause interference. However, if you do experience any interference issues, please contact the Audio-Technica United States (ATUS) Audio Solutions Team to troubleshoot. audio-solutions@atus.com Thanks!

    AudioSolutionsSpec2

    Mount ATW-R3100b and M3T side by side Can an ATW-R3100b and an M3T be mounted side-by-side in a rack? Would I need to use the AT8630 joining-plate, or the AT8623 joining-plate?

    cpuguru07

    Thank you for your inquiry. We do not recommend placing a wireless receiver and an in-ear transmitter in the same rack. This almost certainly results in interference, even when in different frequency bands.

    AudioSolutionsManager

    Does AT8630 joining plate include rack ears for ATW-3000 series receivers? If not, what other part is needed to rack mount ATW-3000 in pairs?

    khhco

    Thank you for your inquiry. No the rack ears are included with the wireless system. If need to order them they are available through our parts department at 330-686-2600- opt 4.

    AudioSolutionsManager

    I need the side mounting plates for 2000 series wireless receivers. I already have the AUAT8630 joining plates. I need 4 of the side-mounting plates for the receivers to put them into a rack. Please direct me to the item #. Thanks.

    videopaul

    Thank you for your inquiry. Please contact our parts department at 330-686-2600 option 4 and advise that you need rack ears for the 2000 series receiver.

    AudioSolutionsManager