Audio-Technica Menu


Dual Moving Magnet Cartridge

U.S. One-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

  • Overview

    The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM750SH is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s Shibata stylus provides greater surface contact with the record groove than an elliptical stylus does, resulting in the pickup of ultra-high frequencies with less groove stress and distortion. Includes mounting hardware.

  • Features

    • VM dual magnet cartridge with Shibata stylus

    • Aluminum tapered cantilever

    • Paratoroidal coils improve generating efficiency

    • Center shield plate between the left and right channels reduces crosstalk

    • Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield

  • Specifications

    Frequency Response 20-27,000 Hz
    Channel Separation 30 dB (1 kHz)
    Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
    Stylus Construction Nude square shank
    Recommended Load Impedance 47,000 ohms
    Output 4.0 mV (at 1 kHz, 5 cm/sec)
    Channel Balance 1.0 dB (1 kHz)
    Stylus Shape 2.7 x 0.26 mil Shibata
    Cantilever Aluminum tapered pipe
    Mount Half-inch
    Replacement Stylus VMN50SH

    Coil Impedance: 2,700 ohms (1 kHz)
    DC Resistance: 800 ohms
    Load Capacitance: 100-200 pF
    Coil Inductance: 460 mH (1 kHz)
    Static Compliance: 40 x 10-6 cm/dyne
    Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz)
    Vertical Tracking Angle: 23° Dimensions: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D
    Weight: 8.0 g (0.3 oz)
    Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush, lead wire set

  • Reviews

  • Q & A

    I have an Pioneer PL 550 - will this pick up suites the s- shaped heavy tonarm on this player. What other AT pick ups will do the thing with this player if this do not? Recomondations on pick ups to that player would be lovely.....


    You may contact Audio-Technica Europe for further assistance.


    Can the VM750SH be used to upgrade the cartridge found on the AT-LP120 Turntable?


    Yes it can.


    Will this play an old CD-4 quad record? It has the Shibata stylus but the frequency response is only 27000 hz. The CD-4 carrier is at 30,000 hz. Also the tracking force seems high. Will it damage the CD-4 records?


    Thank you for your inquiry. I do not believe this would work.


    Can the VM750SH be used to upgrade the AT95EX cartridge found on the AT-LP5 Turntable?

    AT-LP5 User

    Yes, that would be a very nice pairing.


    Hello, Wondering if the 750SH is in stock yet for USA? Thanks and regards,


    Thanks for your inquiry. Yes they are available on our website or any authorized dealers.