Audio-Technica Menu

AT-OC9XEB

Dual Moving Coil Cartridge


U.S. One-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

  • Overview

    The AT-OC9XEB Dual Moving Coil cartridge with bonded elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the bonded elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws no nuts required.

  • Features


    • Dual moving coil design, featuring independent coils for both left and right channels, provides outstanding channel separation

    • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion

    • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws no nuts required

    • Features a bonded elliptical stylus and aluminum cantilever

    • A neodymium magnet and pure iron yoke provide increased magnetic energy

    • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction

    • Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

  • Specifications


    TypeDual Moving Coil
    Body MaterialAluminum
    Frequency Response 20-30,000 Hz
    Channel Separation 25 dB (1 kHz)
    Vertical Tracking Angle20
    Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
    Recommended Load Impedance Min. 100 ohms (when head amplifier is connected)
    Coil Impedance12 ohms (1 kHz)
    DC Resistance12 ohms
    Coil Inductance25 mH (1 kHz)
    Output 0.32 mV (at 1 kHz, 5 cm/sec)
    Channel Balance 1.5 dB (1 kHz)
    Stylus Shape Elliptical bonded
    Stylus Type Bonded round shank
    Stylus Curvature Radius0.3 x 0.7 mil
    Cantilever Aluminum pipe
    Static Compliance20 x 10-6 cm/dyne
    Dynamic Compliance9 x 10-6 cm/dyne (100 Hz)
    Wire Used for CoilPCOCC
    Terminal PinsBrass
    Mount Half-inch
    Weight7.6 g (0.3 oz)
    Dimensions17.3 mm (0.68") H 16.8 mm (0.66") W 25.7 mm (1.01") D
    Accessories IncludedNon-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm 2, 8 mm 2, 10 mm x 2, 12 mm x 2); plastic protector; brush



    Mounting Feature: Threaded body

    Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.


    Conditions
  • Reviews

  • Q & A