Audio-Technica Menu


Headshell/Cartridge Combo Kit

U.S. One-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

  • Overview

    The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell.

  • Features

    • VM dual magnet cartridge with 3.0 mil conical stylus

    • Aluminum cantilever

    • Specially wound coils increase output voltage

    • Durable low-resonance polymer housing

    • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts or washers required

    • Compatible with any AT-VMN95 replacement stylus

    • Universal "-mount headshell for 4-pin turntable cartridges

  • Specifications

    Frequency Response 20-20,000 Hz
    Channel Separation NA
    Vertical Tracking Angle23
    Vertical Tracking Force 4.5-5.5 g (5.0 g standard)
    Stylus Construction Bonded round shank
    Recommended Load Impedance 47,000 ohms
    Coil Impedance3.3 k ohms (1 kHz)
    DC Resistance485 ohms
    Coil Inductance550 mH (1 kHz)
    Recommended load capacitance100 to 200 pF
    Output 2.7 mV (1 kHz, 5 cm/sec.)
    Channel Balance 1.5 dB (1 kHz)
    Stylus Shape 3.0 mil conical
    Cantilever Aluminum pipe
    Mount Half-inch
    WeightCartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz)
    DimensionsCartridge 17.2 mm (0.68") H 18.9 mm (0.74") W 28.3 mm (1.20") D; Cartridge & Headshell 21.2 mm (0.83") H 21.4 mm (0.84") W 62.4 mm (2.46") D
    Replacement Stylus AT-VMN95SP
    Accessories IncludedTwo 11 mm installation screws, two 8 mm installation screws, two washers

  • Reviews

  • Q & A

    Other than remove the cartridge/combo from the tone arm on my LP-120 and screw this on in it's place, do I have to do anything else to properly play my 78 shellac records? I'm totally a newbie on all of this. Thanks!


    Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at for assistance with this.


    Will this work on the AT LP3BK model?


    The VM95SP cartridge will work with the AT-LP3 turntable but you will need to mount to the AT-HS3 headshell to use with the AT-LP3 turntable.


    will this cartridge work with my AT-LP120-USB?


    Yes it will.