Audio-Technica Menu

AT-VM95EN/H

Headshell/Cartridge Combo Kit


U.S. One-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

  • Overview

    The AT-VM95EN/H combo kit includes the AT-VM95EN dual moving magnet cartridge premounted on the AT-HS6BK headshell.

  • Features


    • VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus

    • Aluminum cantilever

    • Specially wound coils increase output voltage

    • Durable low-resonance polymer housing

    • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts or washers required

    • Compatible with any AT-VMN95 replacement stylus

    • Universal "-mount headshell for 4-pin turntable cartridges

  • Specifications


    Frequency Response 20-23,000 Hz
    Channel Separation 22 (dB at 1 kHz)
    Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
    Stylus Construction Nude round shank
    Recommended Load Impedance 47,000 ohms
    Output 3.5 mV (1 kHz, 5 cm/sec.)
    Channel Balance 2.0 dB (1 kHz)
    Stylus Shape 0.3 x 0.7 mil elliptical
    Cantilever Aluminum pipe
    Mount Half-inch
    Replacement Stylus AT-VMN95EN



    Coil Impedance: 3.3 k ohms (1 kHz)
    DC Resistance: 485 ohms
    Load Capacitance: 100 to 200 pF
    Coil Inductance: 550 mH (1 kHz)
    Vertical Tracking Angle: 23
    Dimensions (Cartridge): 17.2 mm (0.68") H 18.9 mm (0.74") W 28.3 mm (1.20") D
    Weight (Cartridge): 6.1 g (0.22 oz)
    Dimensions (Cartridge & Headshell): 21.2 mm (0.83") H 21.4 mm (0.84") W 62.4 mm (2.46") D
    Weight (Cartridge & Headshell): 15.5 g (0.55 oz)
    Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver


    Conditions
  • Reviews

  • Q & A

    Will this be compatible with my SL-D2?

    Weez912

    It appears the turntable you listed has a S shaped tone arm similar to the AT-LP120-USB turntable in which case, yes, the AT-VM95EN/H should work for you.

    Brent