Audio-Technica Menu

AT-VM95E

Dual Moving Magnet Cartridge

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

  • Overview

    This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

  • Features


    • VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus

    • Aluminum cantilever

    • Specially wound coils increase output voltage

    • Durable low-resonance polymer housing

    • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required

    • Compatible with any AT-VMN95 replacement stylus

  • Specifications


    Frequency Response 20-22,000 Hz
    Channel Separation 20 (dB at 1 kHz)
    Vertical Tracking Angle23°
    Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
    Stylus Construction Bonded round shank
    Recommended Load Impedance 47,000 ohms
    Coil Impedance3.3 k ohms (1 kHz)
    DC Resistance485 ohms
    Coil Inductance550 mH (1 kHz)
    Load Capacitance100 to 200 pF
    Output 4.0 mV (1 kHz, 5 cm/sec.)
    Channel Balance 2.0 dB (1 kHz)
    Stylus Shape 0.3 x 0.7 mil elliptical
    Cantilever Aluminum pipe
    Mount Half-inch
    Weight6.1 g (0.22 oz)
    Dimensions17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
    Replacement Stylus AT-VMN95E
    Accessories IncludedTwo 11 mm installation screws, two 8 mm installation screws, two washers



    Conditions
  • Reviews

    Perfect AT-95E Replacement

    5

    I've had my AT-LP120 USB-BK for nearly two years; the AT-95E that came with it was a wonderful cartridge, especially after it had time to be broken in. However, once I found out that the AT-95E was discontinued, I knew that I needed to find a replacement. The AT-VM95E is the one to replace it! It tracks all of my records well; sound distortion in the inner grooves are nearly extinct; the stereo separation is improved over its predecessor. The feature that I LOVE about the AT-VM95E is the ability to change the stylus to one that you desire to have without having to replace the entire cartridge. Talk about versatility! I'll be holding onto the AT-VME 95E cartridge for as long as I can! (Later on, I'm going to upgrade the stylus from the E to the ML.)

    Houston, TX

    true

    AT-VM95E Dual Moving Magnet Cartridge

    5.0 1

    100.0

  • Q & A

    What is the height of the cartridge?

    Chris D

    You may contact Audio-Technica Europe for further assistance. http://www.audio-technica.com/world_map/

    Brent

    The A95E seems to work better in higher mass arms, will these new VM95E work better in low mass arms than the AT95E?

    Math

    You may contact Audio-Technica New Zealand for further assistance. http://www.audio-technica.com/world_map/

    Brent

    when will this version of the cartridge be available?

    vinyl spinner

    It is scheduled for sometime next month. Keep up to date with releases and other Audio-Technica news by signing up for the E-News Letter. http://www.audio-technica.com/cms/site/7811070aaac40d9b/index.html

    Brent

    When is this cartridge going to be available and how much will the be? (I like that it has more output that the one it replaces)

    Duney

    It is scheduled to be released sometime next month. Keep up to date with releases and other Audio-Technica news by signing up for the E-News Letter. http://www.audio-technica.com/cms/site/7811070aaac40d9b/index.html

    Brent