Audio-Technica Menu

BPHS2C-UT

Broadcast Stereo Headset


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • broadcast headset


  • Overview
  • Specifications
  • Reviews
  • Q & A

  • Overview

    BPHS2C broadcast stereo headset with BPCB3 unterminated cable.
  • Specifications

    TypeClosed-back Dynamic (Headphone)
    Cardioid Condenser (Microphone)
    Driver Diameter45 mm (Headphone)
    MagnetNeodymium (Headphone)
    Voice CoilCopper-clad aluminum wire
    Frequency Response15-28,000 Hz (Headphone)
    Maximum Input Power1,600 mW at 1 kHz (Headphone)
    Sensitivity102 dB (Headphone)
    Impedance38 ohms (Headphone)
    Weight240 g (8.5 oz)
    CableDetachable 3.0 m (9.8') long cable with 6-pin connector at headset end; unterminated
    Accessories IncludedPouch; 3 windscreens; cable clip; 6/3 mm (1/4") screw-on adapter
    Type (Microphone)Cardioid Condenser
    Click on the chart to view the larger image
    Microphone Polar Pattern
    Microphone Polar Pattern
    Click on the chart to view the larger image
    Microphone Frequency Response
    Microphone Frequency Response



    Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa (Microphone)
    Frequency Response: 60-15,000 Hz (Microphone)
    Impedance: 100 ohms (Microphone)
    Max Input Sound Level: 140 dB SPL (1 kHz at 1% THD) (Microphone)
    Signal-to-Noise Ratio: 60 dB, 1 kHz at 1 Pa, A-weighted (Microphone)
    Dynamic Range: 106 dB, 1 kHz at Max SPL (Microphone)
    Phantom Power Requirements: 11-52V DC, 2 mA typical
    Dimensions: 12 mm (0.47") outside diameter (Microphone)


    Conditions
  • Reviews

  • Q & A