Audio-Technica Menu


ó With omnidirectional, cardioid and figure-of-eight polar patterns, the AT4047MP has been optimized to meet the demands of professional recording, broadcast and sound reinforcement ó

Stow, OH 09-08-2009 Audio-Technica, a leading innovator in transducer technology for over 45 years, unveils the AT4047MP Multi-Pattern Condenser Microphone, developed in direct response to end users requesting a multi-pattern version of A-Tís legendary AT4047/SV. The AT4047MP is one of the new offerings from A-Tís expanding 40 Series microphones. The AT4047MP, featuring a warm vintage sound with exceptionally low self-noise, a wide dynamic range and high SPL capability, is a side-address externally polarized (DC bias) multi-pattern condenser microphone with three switchable polar patterns: omnidirectional, cardioid, and figure-eight. These settings control the microphoneís sensitivity to sounds coming from different directions. Like the AT4047/SV on which it was based, the AT4047MPís transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs.

The AT4047MP is designed to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement. Specific applications in which the AT4047MP shines include vocals, acoustic instruments, solo or group strings and any application needing a versatile, switchable-pattern condenser mic with rich, vintage sound.

The AT4047MPís omnidirectional polar pattern is sensitive to sound coming from all directions. Users can select the omni pattern to pick up several voices or instruments on the same microphone, to diminish proximity effect and to preserve the locationís ambient sound. The cardioid polar pattern is more sensitive to sound originating directly in front of the element, making it useful in controlling feedback, reducing pickup of unwanted sounds and providing isolation between performers. The figure-of-eight polar pattern is more sensitive to sound originating in the front and back of the microphone, rejecting sounds from the sides. It is often used in conjunction with advanced stereo miking techniques.

The AT4047MPís output is a 3-pin XLRM-type connector. It requires 48V phantom power for operation. The microphone is equipped with a switchable 10 dB pad and a switch that permits choice of flat response or low-frequency roll-off (via integral 80 Hz high-pass filter).

The AT4047MP is enclosed in a rugged housing. The precision-machined nickel-plated brass acoustic element baffle provides enhanced element stability and optimal sensitivity. The dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone. Unwanted internal reflections are minimized by the symmetrical housing assemblyís open acoustical environment. The AT4047MPís state-of-the-art design and manufacturing techniques ensure compliance with A-Tís stringent consistency and reliability standards; the mic is RoHS compliant, meaning it is free from all substances specified in the EU directive on hazardous substances.

The included AT8449/SV shock mount provides superior isolation and permits mounting on any microphone stand with 5/8Ē-27 threads. The mic and shock mount both feature a vintage silver-matte finish. A dust cover and a protective carrying case are also included.

The AT4047MP Multi-Pattern Condenser Microphone will be available November 2009 with a U.S. MSRP of $1,055.00. For more information, please visit

Celebrating over 45 years of audio excellence worldwide, Audio-Technica is a leading innovator in transducer technology, renowned for the design and manufacture of microphones, wireless microphones, headphones, mixers, and electronics for the audio industry.

óFor more information on the complete range of Audio-Technica products, contact Karen Emerson, Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, OH 44224. Tel: (330) 686-2600; Fax: (330) 688-3752; Web:

ó For further information regarding product availability and pricing in the United Kingdom, please contact Harvey Roberts (; in Germany, please contact Anja Groth(; in the rest of Europe, please contact Evangťline Pirot (